Audio-Next : True 768Khz 32 bits of SPDIF/I2S/Dop/DSD/SRC/ASRC !!

[torgeirs]

yes.

so, source file normalize is very important to make sure frequency domain under "0dB " in signal band (for example,20~20kHz @44.1kHz).

OK, so the chip do not 'support' intersample overload. And changes to the source files has to be done if they contain such overload.
Regards Torgeir

 

[chiujc]

Is there any one ever use this chip or demo board? Does the performance is same as the title?

 

[kfshu2]

Audio-Next : True 768Khz 32 bits of USB audio

True 32 bits of USB 768khz :


ComTrue Inc. - Products


.PCM 768k/32
.DSD 8x
.Dop 4x

 

[TNT]

Can any of these boards support my ADC board which is I2S out and requires:

I2S: 48 / 96 / 192 khz
I2S: 32 bit
I2S: slave

Preferably the output would be USB but s/pdif opto would be OK also.

If yes, how is configuration done?

Cost for board?

//

 

[kfshu2]

Can any of these boards support my ADC board which is I2S out and requires:

I2S: 48 / 96 / 192 khz
I2S: 32 bit
I2S: slave

Preferably the output would be USB but s/pdif opto would be OK also.

If yes, how is configuration done?

Cost for board?

//

Yes

ComTrue Inc. - Contact

 

[bbp]

True 32 bits of USB 768khz :


ComTrue Inc. - Products


.PCM 768k/32
.DSD 8x
.Dop 4x

I've checked the DS from your website, but there's no TPC on any document.
Is it good to have two CT7302PL in series to support 44.1kHz SPDIF input and outputs DSD512? How about the performance for such a case?
Thank u.