An excellent depiction of tracking error is made here:
http://www.audioasylum.com/audio/vinyl/messages/118668.html
Check it out!
-j
http://www.audioasylum.com/audio/vinyl/messages/118668.html
Check it out!
-j
An externally hosted image should be here but it was not working when we last tested it.
tracking error spreadsheet
After a bit of searching, I didn't find a tracking error spreadsheet. I did one in xcel. I can email it to anyone interested (xls isn't a valid file type for attaching, dang viruses) who would like to check it out (let me know if there are any errors). Or if you know of one, post a reply (I could check mine, see what else might be of use).
You adjust effective arm length, pivot distance and stylus angle and get the tracking angle error over 10 points across the record.
After a bit of searching, I didn't find a tracking error spreadsheet. I did one in xcel. I can email it to anyone interested (xls isn't a valid file type for attaching, dang viruses) who would like to check it out (let me know if there are any errors). Or if you know of one, post a reply (I could check mine, see what else might be of use).
You adjust effective arm length, pivot distance and stylus angle and get the tracking angle error over 10 points across the record.
Hi,
Here you can download an excellent Excel spreadsheet by John Elison:
http://www.enjoythemusic.com/freestuff.htm
(Scroll down the page, it is nearly at the bottom)
Cheers 😉
Here you can download an excellent Excel spreadsheet by John Elison:
http://www.enjoythemusic.com/freestuff.htm
(Scroll down the page, it is nearly at the bottom)
Cheers 😉
close enough
My tracking values matched to within a few hundredths of a degree - small angle calculation error buildup. I liked my spreadsheet better though as I found the groove tangient values not what I thought until I read the text more carefully; and I thought there were way too many points calculated. Yeah, everbodys a critic. . Anyway, great stuff.
My tracking values matched to within a few hundredths of a degree - small angle calculation error buildup. I liked my spreadsheet better though as I found the groove tangient values not what I thought until I read the text more carefully; and I thought there were way too many points calculated. Yeah, everbodys a critic. . Anyway, great stuff.
- Status
- Not open for further replies.