few months ago i bought an X150 and it all performs well with my TAD 500. but these days i found the left channel is hotter than the right channel.
after measuring the voltage across the 0R47 source resistor, I found the right channel is about 30mV and left is 38mV in average.
get into headache now, which one is closer to the factory setting?>
anyone can help me out?>
after measuring the voltage across the 0R47 source resistor, I found the right channel is about 30mV and left is 38mV in average.
get into headache now, which one is closer to the factory setting?>
anyone can help me out?>
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.