Is it possible, after certainly modify to use this amp for audio applications?
SA01 pdf, SA01 description, SA01 datasheets, SA01 view ::: ALLDATASHEET :::
http://www.cirrus.com/en/pubs/rdDatasheet/EK01U_F.pdf
SA01 pdf, SA01 description, SA01 datasheets, SA01 view ::: ALLDATASHEET :::
http://www.cirrus.com/en/pubs/rdDatasheet/EK01U_F.pdf
It's not intended for audio. Clock seems to be 42khz. Datasheet says that there is some dead time, but the value is not specified. The voltage drop of P channel body diodes is interestingly high.
With pre or post-filter feedback it could be used as a bridged subwoofer amplifier (if the error amplifier is good enough).
With pre or post-filter feedback it could be used as a bridged subwoofer amplifier (if the error amplifier is good enough).
- Status
- Not open for further replies.