hello everyone,I bought a used ATS-2, but the machine lacks a fuse holder. I found a way to install an external fuse on the machine, but now I have a few problems. When I soldered the fuse and tried to power on the machine, the fuse blew immediately, even if I unplugged the secondary line of the transformer from the motherboard. I have confirmed that the voltage jumper has jumped to the voltage I use. Can anyone who has an ATS-2 take some photos of the power input terminal inside the machine and the transformer harness? I want to confirm that the transformer multi-voltage jumper is plugged in the correct position. Thank you
Hi,Audio1Man,thanks for the pictures. I measured the secondary of the transformer. The secondary of ORN-BLK-ORN seems to be shorted. The resistance is only about 0.1Ω. Can I know where to find out what the secondary voltage of each set of transformers is? Maybe I need to find a new transformer to replace the one on the machine.
