Any Twin Power triode Noval type?

[john]

Help Please!

Was there any twin power triode tube made by any manufacturer that is Noval type which got a 6.3 or a 12 volt filament?

 

[kmtang]

Would the 6080 and 6AS7 you are looking for?

Johnny

 

[EC8010]

E182CC (Pa = 4.5W), is probably the nearest you're going to get to a dual power triode on a Noval base. If you don't mind a single triode, then A2293 (15W) is a useful valve.

 

[sajti]

E182CC (Pa = 4.5W), is probably the nearest you're going to get to a dual power triode on a Noval base. If you don't mind a single triode, then A2293 (15W) is a useful valve.

ECC99 also good for this application. (Pa=5W).

sajti

 

[Sch3mat1c]

12AU7 works for me 😀 Got a dozen on hand? 😉

Can't really think of any offhand. Did the Russians make a dual 6P45S sorta deal? Mark?

Tim

 

[john]

Twin power triode noval base

Thanks a lot guys!

I am intending to build a very compact integrated amplifier that would require minimal tubes.

6080/6as7/5998 are octal types, And out of the ideal concept with regards to the chassis I am intending to design.

I'll check the availabilty of the E182CC tube in my locallity.


John

 

[reinhard]

5687, 6H30 or Ecc182 variant 6H6, cheap from Russia and strong sound.

Reinhard

 

[SY]

Don't discount the idea of mixed dual triodes, e.g, 6GF7 (they use the big 9 pin base). A pair of those will give you two high mu low current triodes suitable for a phase splitter and a pair of low mu high current triodes suitable for output tubes.

 

[EC8010]

Don't discount the idea of mixed dual triodes...

And if you don't mind doing that, RCA made 6EW7 in a slim envelope (rather than the more standard fat one).