Have an +/- 22v power supply an 4 - 10.000 uf cap (two per channel).. need an recomendation
power amp schematic for this power supply.
20/25w per chenel good sound and elaborate schema..any idea?
power amp schematic for this power supply.
20/25w per chenel good sound and elaborate schema..any idea?
try ESP for a discrete design.
or any of the chipamps, particularly Nuuk's (Decibel dungeon; http://myweb.tiscali.co.uk/nuukspot/decdun/).
or any of the chipamps, particularly Nuuk's (Decibel dungeon; http://myweb.tiscali.co.uk/nuukspot/decdun/).
http://www.passdiy.com/pdf/a40.pdf
Circuit boards available from AudioXpress.com for $6.
May be adapted to use locally available transistors, or run class AB.
Circuit boards available from AudioXpress.com for $6.
May be adapted to use locally available transistors, or run class AB.
I read this post a couple of days ago and ported my two amps
for operation at +- 22v.
With just a change of 2 resistors I was able to get premium
performance at 35w/8r using a single cheap pair of NJW0281/
0302.
Final price for this was about 14$ per amp (mouser) but
what you get on a 3X3 PCB is a .08% distortion "blameless"
that sounds the same as its "big brothers" ,the FA1/ FA2.
No "threadjacking' here, but the design is being tested
with much abuse...
would be a sleeper to post a "mini frugalamp1" for any
interested...
OS
for operation at +- 22v.
With just a change of 2 resistors I was able to get premium
performance at 35w/8r using a single cheap pair of NJW0281/
0302.
Final price for this was about 14$ per amp (mouser) but
what you get on a 3X3 PCB is a .08% distortion "blameless"
that sounds the same as its "big brothers" ,the FA1/ FA2.
No "threadjacking' here, but the design is being tested
with much abuse...would be a sleeper to post a "mini frugalamp1" for any
interested...
OS
- Status
- Not open for further replies.