Hii..
I require a digital PLL IC which is availabel in DIP/PDIP pack.. not an SMD component..
It require it for my 100MHz VCO..
Thnks in advance,
Prasanna.
I require a digital PLL IC which is availabel in DIP/PDIP pack.. not an SMD component..
It require it for my 100MHz VCO..
Thnks in advance,
Prasanna.
10 or 100mhz.
Try Texas instruments.They have plls.
If 10mhz. the 74hc4046 should be able to perform at that frequency.Or the older CD4046 cmos and the various brands.
Try Texas instruments.They have plls.
If 10mhz. the 74hc4046 should be able to perform at that frequency.Or the older CD4046 cmos and the various brands.
Freescale MC145170.
You'll need a micro to configure it. There's pin-programmable versions (MC145151/2) too, though I haven't worked with these.
You'll need a micro to configure it. There's pin-programmable versions (MC145151/2) too, though I haven't worked with these.
anbello said:
this might not accept 100MHz i/p freq or above..
how old is Motorola MC145170.. is it obsolete.. or still alive..
http://focus.ti.com/docs/prod/folders/print/cd74act297.html
this is faster but only SOIC, you can use SOIC to DIP adapter.
this is faster but only SOIC, you can use SOIC to DIP adapter.
- Status
- Not open for further replies.