Antek DC-50 Rectifier Modules - What can I use them for?

[Dneu2011]

I have a pair of Antek DC-50 rectifier modules and was trying to figure out what I could use them for. Would these work fine in an F4 or F5 build with an AS-3218 or 4218? Or could one be used for an amp camp?

DC-50 Rectfier Module - AnTek Products Corp

 

[ubergeeknz]

This should be usable for most anything with 50v or lower rails.

 

[Dneu2011]

How would I wire two of them with one transformer to get a + from one device and - rail from the other? I’ve built a few pass amps but I generally use the PSU board from the store.

Thanks.

 

[ubergeeknz]

How would I wire two of them with one transformer to get a + from one device and - rail from the other? I’ve built a few pass amps but I generally use the PSU board from the store.

Thanks.

It seems as if this board isn't designed for split rail operation. You could fairly easily modify them, one way would be to remove the rectifiers and just use the boards as capacitor banks between CT and each rail (with one bridge offboard)

 

[Dneu2011]

Ok. Could I use one of them for an amp camp with transformer? I would prefer not to take them apart if I don’t need to.