ALL SOLD
SOLD ILP 160VA 22VAC secondaries. This has a single pair of 120VAC primary wires and dual secondaries. When I held the MyRefC group buys I sold these along with the kits. These 3 toroids had damage to the plastic insulating wrapping tape that goes around the windings. They still work fine with no shorts but you might tape them up in a few places.
ILP Toroids 8usd each
SOLD Antek 4218 400VA 115VAC dual primary 18VACdual secondary toroid
The transformer was used to power my MyRefC build. Primary wires are about 3-4inches long and secondaries are 6 and 12 inches long.
You pay shipping. Think flat rate box. 10usd minimum but I have lots of other things for sale on the swap meet and you should be able to get a 10usd order together easily.
SOLD ILP 160VA 22VAC secondaries. This has a single pair of 120VAC primary wires and dual secondaries. When I held the MyRefC group buys I sold these along with the kits. These 3 toroids had damage to the plastic insulating wrapping tape that goes around the windings. They still work fine with no shorts but you might tape them up in a few places.
ILP Toroids 8usd each
SOLD Antek 4218 400VA 115VAC dual primary 18VACdual secondary toroid
The transformer was used to power my MyRefC build. Primary wires are about 3-4inches long and secondaries are 6 and 12 inches long.
You pay shipping. Think flat rate box. 10usd minimum but I have lots of other things for sale on the swap meet and you should be able to get a 10usd order together easily.
Attachments
Last edited:
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.