Hello ErnestErnest
Banktransfere made, I think 😕
Let me know if it didn't go through 🙂
It must be a lot of work and I'm very greatful.
Best regards to All
Banktransfere made, I think 😕
Let me know if it didn't go through 🙂
It must be a lot of work and I'm very greatful.
Best regards to All
@ tassok: sheet is open again
@ DER___: will see 🙂
hope, Jogi might help a bit, even he isn't aware of that 😉
it will take some time to sort everything out. I woun't get into a hurry, but you have to be slightly patient.
Cheers Ernst
@ DER___: will see 🙂
hope, Jogi might help a bit, even he isn't aware of that 😉
it will take some time to sort everything out. I woun't get into a hurry, but you have to be slightly patient.
Cheers Ernst
Hi Ernst,
I'm following the DAC End Thread and I see that the recommended rectifier diode for the Salas shunt is 1N5819 Schottky and not the general purpose 1N5062.
At Reichelt the 1N5819 is 0.01euro more expensive, so 0.12 would be for 12. If the others sent you a bit above the total price (or rounded up) this difference should cover.
What do you think?
Zsolt
p.s. If you don't want to change it's ok 🙂
I'm following the DAC End Thread and I see that the recommended rectifier diode for the Salas shunt is 1N5819 Schottky and not the general purpose 1N5062.
At Reichelt the 1N5819 is 0.01euro more expensive, so 0.12 would be for 12. If the others sent you a bit above the total price (or rounded up) this difference should cover.
What do you think?
Zsolt
p.s. If you don't want to change it's ok 🙂
So far I have not ordered. Can order these. There are some different BOM versions existing. A bit tricky....
Cheers Ernst
Cheers Ernst
Indeed it's a bit tricky. As that is the recommended one and the others are agreeing please order these.
Thanks,
Zsolt
Thanks,
Zsolt
Zsolt,
1N5062 is 2A 800V
1N5819 is 1A 40V
They don't match, do they?
We need a lot of them in the DAC. Could anyone figure out, which can be substituted by the 5819 and which ones can't.
Ernst
1N5062 is 2A 800V
1N5819 is 1A 40V
They don't match, do they?
We need a lot of them in the DAC. Could anyone figure out, which can be substituted by the 5819 and which ones can't.
Ernst
Hello Ernst,
According to the latest BOM of Quanghao BOM Link the Salas shunts use low voltage Schottky 1A 1N5819 (D1-D12) -which is more than enough there-, whereas, the PSU for I/V uses the high voltage 1N5062 (D1-D4, D6-D8).
Of course they don't match, but according to the latest BOM it makes sense: fast diodes for the precision 5V parts and general purpose for the high voltage one.
Regards,
Zsolt
According to the latest BOM of Quanghao BOM Link the Salas shunts use low voltage Schottky 1A 1N5819 (D1-D12) -which is more than enough there-, whereas, the PSU for I/V uses the high voltage 1N5062 (D1-D4, D6-D8).
Of course they don't match, but according to the latest BOM it makes sense: fast diodes for the precision 5V parts and general purpose for the high voltage one.
Regards,
Zsolt
Last edited:
Thanks, got a lot of payments this week. Will sort out all this on weekend and order 🙂
Cheers Ernst
Cheers Ernst
Payment
Dear all,
please have a look at the spreadsheet. I updated it regarding received payment. green colorcode means, everything ok. Yellow means, not enough money arrived, no color means, no money arrived.
Please pay quick. I'd like to order, not at least for cheap prices!!!
Cheers Ernst
Dear all,
please have a look at the spreadsheet. I updated it regarding received payment. green colorcode means, everything ok. Yellow means, not enough money arrived, no color means, no money arrived.
Please pay quick. I'd like to order, not at least for cheap prices!!!
Cheers Ernst
Hi, still waiting for the last one to pay. I'll definitely order by this weekend. With or without this guy.
I'll let you know after ordering.
Cheers Ernst
I'll let you know after ordering.
Cheers Ernst
Hi Ernst!
If you didn't ordered yet, may I ask you to change some parts, change that don't involve final price modification of course.
Instead of the two Elna Silmic II 220uF/35V for 1,2495 x 2 = 2.499 euros, could you please order two more IRFP 9240, which are 1.5 x 2 = 3 euros. The 0.501 euro price difference should be enough from the difference I paid. Their weight is 4g lower so don't modify the shipping costs.
Thank you!
Zsolt
p.s. I will not be available until next Sunday
If you didn't ordered yet, may I ask you to change some parts, change that don't involve final price modification of course.
Instead of the two Elna Silmic II 220uF/35V for 1,2495 x 2 = 2.499 euros, could you please order two more IRFP 9240, which are 1.5 x 2 = 3 euros. The 0.501 euro price difference should be enough from the difference I paid. Their weight is 4g lower so don't modify the shipping costs.
Thank you!
Zsolt
p.s. I will not be available until next Sunday
Last edited:
- Status
- Not open for further replies.