I have not gone thru all the thread and somebody probably has asked this question before and probably has an answer. I was wondering if there is a place where I can get ALL the electrical parts, including the choice of case, heat sinks, switches etc. for the (revised) Zen Amp and the Balanced Line stage Pre-amp and NOT infringe on the copyright issues.
I don't mind paying for somebody's time & effort to get all the necessary parts together. I was frustrated to have to wait for more than a year to get the output transistors for the Zen amp that I built a couple years ago.
[Edited by fcel on 10-21-2001 at 10:20 AM]
I don't mind paying for somebody's time & effort to get all the necessary parts together. I was frustrated to have to wait for more than a year to get the output transistors for the Zen amp that I built a couple years ago.
[Edited by fcel on 10-21-2001 at 10:20 AM]
Well, I guess there is no such thing as what I have requested in my previous post for the Zen Amp and the Balanced Line Stage Pre-Amp. What about something similar to the web site as shown below - this is for the Pass Labs A40 power amp which I found on this forum. It tells you everything you need to know - parts wise - to built the Amp.
http://www.facstaff.bucknell.edu/esantane/movies/a40.html
http://www.facstaff.bucknell.edu/esantane/movies/a40.html
Pass DIY Addict
Joined 2000
Paid Member
RY: thanks for the link to my web page! I try to keep it updated as I learn about additional information. You might want to check out <a href="http://members.ozemail.com.au/~dkfinnis/passlabs/index.htm">Mark Finnis'</a> web page on the Aleph 4, a40, Son of Zen, and Balanced Line Stage preamp - all from Pass Labs.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.