ο1 precision master clock for digital audio is an upgrade for digital audio devices such as DACs, ADCs, media streamers, CD players, DSPs, etc. For full info please visit the above website.
Here is an example application in a Behringer DCX2496 DSP electronic crossover. A similar mod can be done on the DEQ2496 DSP equalizer.
Here is an example application in a Behringer DCX2496 DSP electronic crossover. A similar mod can be done on the DEQ2496 DSP equalizer.
wahou
Hi, is it possible to use this like a master clock in studio with bnc connector to sync all digital devices to 48 or 96Khz ?
Thx a lot.
Hi, is it possible to use this like a master clock in studio with bnc connector to sync all digital devices to 48 or 96Khz ?
Thx a lot.
The ο1 has an unbuffered output directly from the oscillator. It should be used for one load (input gate). In a system where you need to drive multiple devices, you should add a clock buffer (for example, the TI CDCLVC110xPW, where x is the number of outputs you need).
- Status
- Not open for further replies.