I wouldn't want to risk another failure of these diodes. The ES2D are more robust. I'd replace all 4 with the ES2D. I'd also jump from the input of the diodes for the transformer that you repaired to the diodes for the other transformer.
Did you make sure that the repaired wire couldn't short to the board under the transformer?
Did you replace the vented cap between the mylar caps?
Did you make sure that the repaired wire couldn't short to the board under the transformer?
Did you replace the vented cap between the mylar caps?
I replaced the cap that vented .
I put some silicone on the bottom of the transformer that I repaired so it won’t short to the bottom of the board .
I will jump the diodes from one transformer to the other diodes as suggested.
And will replace the diodes with ES2D
I put some silicone on the bottom of the transformer that I repaired so it won’t short to the bottom of the board .
I will jump the diodes from one transformer to the other diodes as suggested.
And will replace the diodes with ES2D