Allen & Heath ZEDi-10

[calpe]

I have a faulty Allen & Heath ZEDi-10 Mixer.
I'm looking for a new Mixer to replace the faulty A&H Mixer.
Can someone send me some information from where i might be able to find an equivalent mixer, preferably in Europe?

 

[kevinaston1]

Why not repair the ZEDi-10?

There will be dozens of local technicians who will be happy to help you.

 

[calpe]

There appears to be a PCB faulty.
When it's inserted it drags the supply line down and the 'On' led flashes.
This PCB is not available for 6-8 weeks and costs about £80.
Might anyone have the Cct diagram?

 

[kevinaston1]

Sorry, been retired for seven years, so the last similar service manual I have is the ZED-10.

I never replaced a "faulty" PCB in 40 years of servicing, all repairs were to component level.

A local service tech will have access to the service data. Since the fault is a short, a quick scan with a thermal camera will show up the fault .

 

[calpe]

Sadly I don't have a Cct diagram. Here there are no official agents so I enquired to the supplier...

 

[kevinaston1]

I did not say contact an "official" agent; I was never one, and I repaired hundreds of A&H mixers.

ask around local service techs, there will be lots of them, and they will be eager to help.

 

[calpe]

In my part of the world to ask local techs is like looking for a needle in a haystack.

 

[kevinaston1]

I do not know what to say to you.

If a local band or club had a piece of equipment go faulty, do they have to stop working until they can import a replacement piece?

 

[calpe]

That's how the cookie crumbles here....

 

[profiguy]

Such an easy mixer to work on. They have individual cards for each ch strip. Should be straightforward to figure out whats wrong.

 

[Netlist]

Have a look at Behringer: https://www.behringer.com/catalog.html?catalog=Category&category=C-BEHRINGER-MIXERS-ANALOGMIXERS

And send me that A&H in return.

Hugo