Aleph L Question

[Mark Gulbrandsen]

I am doing PCB layout to build an Aleph L line stage and have a question. Capacitor C103 across the MPSA93 is labeled 680 uf. Shouldn't this be 680pf? 680uf is an odd size for an electrolytic although they do exist. Just want to be sure on this one so the pcb's don't have to be altered after they are made up.
Thanks in advance for any help here.
Mark Gulbrandsen
Salt Lake City, Utah

 

[GRollins]

Mark,
That'll be uF. It's there for isolation and noise suppression.

Grey

 

[Mark Gulbrandsen]

Thanks Gray,
I'll allow roomm for that value on the pcb.
mark

 

[Mark Gulbrandsen]

Well, I decided to pull up the PCB layout on Pass Labs web site and C103 and 203 are too small for them to be 680 uf. They must be 680 pf as is C104.
Nelson, If you are out there could you please verify this?
Thanks!
Mark Gulbrandsen
Salt Lake City, UT