Aleph J-X pcb group buy, 2nd run

[Marra]

I see that there are two positions for C4 on the pcb's; does it matter which one is used? Tia

 

[Peter Daniel]

One of those caps is incorrectly labeled; the cap between R5 and R4 on a board should be marked as C1.

 

[Marra]

Thank you Peter. What capacitor did you use?

 

[Marra]

Would two BG Hi Q 0.47uf in parallel be ok?

 

[Peter Daniel]

I used some small film caps for demonstration purpose only. Somebody was talking about 1uF film cap from DigiKey that Nelson uses, but I forgot where it was.

Those two BG Hi Q will be fine.

 

[Marra]

I used some small film caps for demonstration purpose only. Somebody was talking about 1uF film cap from DigiKey that Nelson uses, but I forgot where it was.

Those two BG Hi Q will be fine.

Thanks Peter; Black Gates it is.

 

[jetbat]

Money sent for two channel pcb.
Thanks
Scott

 

[buzzforb]

Boards still available for J-X? No PSU needed.

 

[Fcrawley]

Peter,
Any j-x boards left? Could use enough boards for a stereo J/x full power and Psu.

fcrawley

 

[Peter Daniel]

Yes, plenty of boards still available.

 

[eldnek]

Still available Peter?

I have added my details to the wiki.

Many thanks,

Tom

 

[spas12]

Peter,

I sent you $40 for 2 Aleph J-X boards.

Alex

 

[tadek]

Peter,

I sent You $75 for 3 AlephJ-X and 2 F5 boards

tadek

 

[Peter Daniel]

Peter,

I sent You $75 for 3 AlephJ-X and 2 F5 boards

tadek

Thanks, Will need your shipping address as it was not listed with paypal. You can use forum mail.

 

[Andy5112405]

I'll add in here that I've posted 26 x IRFP244s on SWAPMEET. They were surplus to requirements during my matching of sextets for an Aleph 4.

They are International Rectifier GENUINE devices and have all been tested during the matching process.

Available for £4.00 GBP each plus P&P or £10 for a matched pair plus P&P.

Please contact me at Andy815408@talktalk.net if you are interested.

I don't charge the silly P&P charges of the big companies. Two MOS-FETs in an envelope - you pay what it actually costs to post them, pennies in most cases.

 

[schultzsch]

Hello
I want to build an Aleph J(2 monoblocks) and I want to know if there is a problem if i connect the Mosfet`s with wire so i can put each 2 of them on lateral heatsinks of the case and what price would have 2 pcb ?

I am from Romania.Do you ship here? Have any ideea what the postal taxes would be?

Thank You

 

[Munga]

Any chance there are still some boards available?

Cheers,
Derek

 

[Alois]

I would also be interested in 4 Aleph J boards. Are there any left?

Alois

 

[dilokm]

Peter, I would like to get 2 for stereo. Still available?

Many Thanks!!

Dilok

 

[3GGG]

I need another pair of J boards to complete my third Aleph J