good .......
for building level of self-confidence, so next time you're going to use eyes and brain, before keyboard
Did use brain and eyes before keyboard; maybe not long enough! Checked continuity. Checked voltages. Basically I just lucked out. If I hadn't jostled r28 in the process of chasing down the problem and noticed that it was misaligned I'd still be scratching my head and sending you pictures. Happened to have a spare 4.7k resistor; now all is back to fine.
On a side note ZenMod,. You mentioned a while ago that you were getting or had just gotten a CNC machine. If so, have you posted your experiences with it anywhere?
On a side note ZenMod,. You mentioned a while ago that you were getting or had just gotten a CNC machine. If so, have you posted your experiences with it anywhere?
CNC - have all custom parts/plates made, everything else I need are industrial pieces, so piece of cake
need time
as with all other things, when I get itch to actually need "somethingsomething" to make with my own CNC, I'll make it pronto
need time
as with all other things, when I get itch to actually need "somethingsomething" to make with my own CNC, I'll make it pronto