Hi !
I m about to build an aleph 3. My only question is about the heatsinks. How much heat does an aneph 3 monoblock dissipate ?
is that heatsink enough for one monoblock ? (100 mm long)
http://www.alutronic.de/AluDB/resul...M+ALLDAT+WHERE+GRP+=+"PR237"+ORDER+BY+ARTSORT
WOW, kinda long url 😀
greetz,
garnex
I m about to build an aleph 3. My only question is about the heatsinks. How much heat does an aneph 3 monoblock dissipate ?
is that heatsink enough for one monoblock ? (100 mm long)
http://www.alutronic.de/AluDB/resul...M+ALLDAT+WHERE+GRP+=+"PR237"+ORDER+BY+ARTSORT
WOW, kinda long url 😀
greetz,
garnex
Check the manual. It should be very clearly stated there.
Otherwise I suspect that it is about 100 W per channel.
/UrSv
Otherwise I suspect that it is about 100 W per channel.
/UrSv
garnex,
with an Aleph 3 you dissipate about 100 watts per channel. So for a temp rise of 30°C you need a heatsink with 0.3 °K/W per channel.
william
P.S.
There is a search button somewhere. Just push it and type something like "heatsink" AND "Aleph 3" and look through the posts. You´ll find many many answers.😎
with an Aleph 3 you dissipate about 100 watts per channel. So for a temp rise of 30°C you need a heatsink with 0.3 °K/W per channel.
william
P.S.
There is a search button somewhere. Just push it and type something like "heatsink" AND "Aleph 3" and look through the posts. You´ll find many many answers.😎
- Status
- Not open for further replies.