Afterburner driver/port placement

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
I am in the process of building a pair of Thorsten's Afterburners. My cabinets are 44 h x 20w x 14 d (157 litres). I am looking for some guidance as to best location for the driver and port. I have an old Goodman's design that would indicate placing the driver very close to the top, maybe 1.5 inches from the edge. Their design has the port about 6 inches from the bottom, on the front panel. Do these dimensions seem appropriate? Thanks for your help.
Jim
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.