Adire Tempest Whitepaper Error

[seangoesbonk]

There is a mistake in the Adire Tempest Whitepaper:

My Email:

Hello,

I have a Tempest but have not yet decided on which design to build.

On the SBB4 Vented Tempest reference design, the write up on page 6 says "It is vented with a pair of FP3 three inch flared port kits, with 5" long center tubes."

Yet in the "CONSTRUCTION NOTES" on the lower left corners of pages 7 and 8, it reads "Port cutouts are 6.25", for a 4" flared port."

I would assume that the design requires 2 of the FP4 4" ports as per the drawings of pages 7 and 8, but I would like confirmation before I order the ports.

Thank you for your time and help,

Sean.

The Reply:

Sean,

Thanks for the e-mail! We'll get that typo fixed as soon as possible. The flares used are twin 3" kits, not the 4" units.

Thanks again,

Adire Tech Support

Has anyone mistakenly build the SBB4 with 4" ports? How does it sound?