Adding line in to tpa3116?

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
C

Camerong

Member
Joined 2015
I brought a sanwu blue tpa3116 on ebay. It was advertised to have a auxiliary input, it had pictures of it with one also. does anyone have a clue on how it could possibly add one? Because bluetooth is great but it lacks in quality. Cheers
 

Attachments

  • 20160525_202719.jpg
    20160525_202719.jpg
    1,019.7 KB · Views: 271
doctormord

doctormord

Member
Joined 2007
360customs.de
You can't without do easily. Get your money back or complain about the wrong board shipped.

Whats the lack in quality with this board exactly?

(I wonder if they really do a Diff2Se convertion there or if this small SOIC8 IC is a6dB differential gain buffer? Whats marked on this 8pin IC right near the mic?)

Regards.
 
Last edited:
doctormord

doctormord

Member
Joined 2007
360customs.de
The board with the line-in is a different board. (1 more button)

The way to implement/inject a line-in with your board would be to open up the audio lines after the Diff2Se circuit (a 5532 would guess) and put in a switched 3.5mm jack. These interrupt the audio from the BT module when a plug is connected.

Question again: What the bt audio quality problem with these board? (The CSR chipsets are pretty descent)
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom