Picked up a 585 se for 75 bucks last night cleaned the output boards replaced the one 220 uf cap that leaked on a couple of j fets which I have no clue as to what they are. "no name parts" amp wont power up at all fuses r all good, soft start is not working, any help would be great. Just so I am clear I did replace all of the caps on the output boards
ok got it powered up, have 175 volts on left rail 95 on other thats one problem other is dc offset on both speaker outputs 5v must be a op amp yes or no
Last edited:
ok here we anyone on here with any knowledge of adcom amps I have checked all rails
I have 86v on left + -86v one left - ok - right is - 86 v heres the kicker + 4 volts on + right
any help would be awesome
I have 86v on left + -86v one left - ok - right is - 86 v heres the kicker + 4 volts on + right
any help would be awesome
Last edited:
ok all good thanks for all the help lol if anyone needs any info on how to clean boards on the 585 let me know
- Status
- Not open for further replies.