I've been going through 8 channel ADC datasheets looking at the analog characteristics for a potential project and noticed that for low sample rates akm measures the 20Hz-20KHz response...but for sample rates above 48KHz, the measurements are in the 40Hz to 40KHz range.
It leaves me a little curious as to what happens in the low band when you operate the device at higher sample rates. I've attached an excerpt from the AKM AK5578 datasheet to show what I am talking about.
Would appreciate any thoughts as to why the different dandwidth measurements would be reported for high FS!
It leaves me a little curious as to what happens in the low band when you operate the device at higher sample rates. I've attached an excerpt from the AKM AK5578 datasheet to show what I am talking about.
Would appreciate any thoughts as to why the different dandwidth measurements would be reported for high FS!