Hallo everyone,
I‘ve been involved in diy speaker building some 10 years ago, finally struggeling with a LaScala clone activated with some self soldered quad405 amps - a friend did copies of print boards. An adventures, that didn’t come to a happy end. 10 years ago I bought the Adam Column active, which didn’t play as other expansive speakers didn’t too, because of the acoustic hell of modern architecture with several big resonaters like an open staircase and lots of large windows on 3 sides in house where I live. In won‘t tell anything about the stony way, which led to the miniDSP SHD and a pair of 15“ RiPol subwoofers, build with the kind support of Axel Ridthaler himself and driven by 600 W amp each. That was the match. Since that I‘m back in the business: some interests concern dipole speakers in combination with the Adam Audio Column to control the diffuse aspects of the soundfield, but the main project is a clone of LaScala in a two way version without the supertweeter but with a 18“ Ripol and DSP cross over with FIR Filters. The DSP board is from allDSP, a german company. That‘s all for the moment…..
Martin
I‘ve been involved in diy speaker building some 10 years ago, finally struggeling with a LaScala clone activated with some self soldered quad405 amps - a friend did copies of print boards. An adventures, that didn’t come to a happy end. 10 years ago I bought the Adam Column active, which didn’t play as other expansive speakers didn’t too, because of the acoustic hell of modern architecture with several big resonaters like an open staircase and lots of large windows on 3 sides in house where I live. In won‘t tell anything about the stony way, which led to the miniDSP SHD and a pair of 15“ RiPol subwoofers, build with the kind support of Axel Ridthaler himself and driven by 600 W amp each. That was the match. Since that I‘m back in the business: some interests concern dipole speakers in combination with the Adam Audio Column to control the diffuse aspects of the soundfield, but the main project is a clone of LaScala in a two way version without the supertweeter but with a 18“ Ripol and DSP cross over with FIR Filters. The DSP board is from allDSP, a german company. That‘s all for the moment…..
Martin
Welcome to DIYaudio!
Thanks for mentioning ALLDSP. They have some interesting products but they do not seem to sell directly to the consumer/DIYer. How did you get the boards? You are welcome to PM me about it.
-Charlie (in Oberbayern)
Thanks for mentioning ALLDSP. They have some interesting products but they do not seem to sell directly to the consumer/DIYer. How did you get the boards? You are welcome to PM me about it.
-Charlie (in Oberbayern)
I bought a pair of plate amps from Gyimpex Audio, with different brandings widely spread in pro Audio and equiped with DSP FIR board from allDSP. A friends gave me the advice, in his company they use a DANTE version, that isn‘t available, if you don’t buy more than 100 Units.
Best regards
Martin from Konstanz
Best regards
Martin from Konstanz
I apologize to the owner of the topic for my question, but DANTE was mentioned here and I have a question that the participants of the topic can answer.
A friend of mine ordered me a DSP Amp with DANTE input and output. DANTE input/output is implemented using a Chinese clone and the program processing the stream determines that it is a clone, but it works correctly.
I was wondering - what do you think, how popular is DANTE support in DIY DSP Amp, which has ADAU1452 on board and three amplifiers of 100 W per channel?
I implemented two stereo inputs to ADAU1452 and two stereo outputs from ADAU1452 back to DANTE on boards for a friend.
I screwed a Chinese DANTE input/output to such an amplifier at the request of a friend.
https://www.diyaudio.com/community/threads/3-way-dsp-amp.415065/
A friend of mine ordered me a DSP Amp with DANTE input and output. DANTE input/output is implemented using a Chinese clone and the program processing the stream determines that it is a clone, but it works correctly.
I was wondering - what do you think, how popular is DANTE support in DIY DSP Amp, which has ADAU1452 on board and three amplifiers of 100 W per channel?
I implemented two stereo inputs to ADAU1452 and two stereo outputs from ADAU1452 back to DANTE on boards for a friend.
I screwed a Chinese DANTE input/output to such an amplifier at the request of a friend.
https://www.diyaudio.com/community/threads/3-way-dsp-amp.415065/