This forum is oriented towards building subwoofers, not the electronic crossovers that may be used with them.Friends,
Need a circuit (shematics or project) for active filter for subwoofer with a TL082 or NE5532 or similar!
Upper frequency to be 120Hz and has a sustained ability to reduce the 80Hz!
thanks
Try looking in the Source & Line forums:
Analog Line Level
Preamplifiers , Passive Pre-amps, Crossovers, etc.
http://www.datasheetcatalog.org/datasheet/nationalsemiconductor/DS008357.PDF
Active Filters The 24dB/oct is another option.
Should be easy enough to build.
Active Filters The 24dB/oct is another option.
Should be easy enough to build.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.