Hi all,
Any South African gainclone builders out there? Where do you source your LM3875's from and what about 2SK170 (as used by Pedja in his buffered gainclone).
http://www.geocities.com/react_71/audio/gainclone/gainclone.htm
Regards
Ryan
Any South African gainclone builders out there? Where do you source your LM3875's from and what about 2SK170 (as used by Pedja in his buffered gainclone).
http://www.geocities.com/react_71/audio/gainclone/gainclone.htm
Regards
Ryan
Ryan
2SK170 you can get from Mantech (www.mantech.co.za) in JHB. They also have LM1875. 3875 you'll probably have to buy off the net. Same as practically everything else if you really want to make it sing
cheers
peter
2SK170 you can get from Mantech (www.mantech.co.za) in JHB. They also have LM1875. 3875 you'll probably have to buy off the net. Same as practically everything else if you really want to make it sing
cheers
peter
Automation Techniques Pty Ltd
1 Cambridge Avenue,
Durban,
P.O. Box 17257,
Congella 4013
South Africa.
Tel: ++ 27 31 256356
Fax: ++ 27 31 259536
eMail: farnell@automation.co.za
They have the LM3875
Others will have to provide you a source for 2SK170...
Meanwhile, here the datasheet for the 2SK:
http://semiconductors.electronica.ro/toshiba/datasheet/1027.pdf
Greetings
/Hugo
1 Cambridge Avenue,
Durban,
P.O. Box 17257,
Congella 4013
South Africa.
Tel: ++ 27 31 256356
Fax: ++ 27 31 259536
eMail: farnell@automation.co.za
They have the LM3875
Others will have to provide you a source for 2SK170...
Meanwhile, here the datasheet for the 2SK:
http://semiconductors.electronica.ro/toshiba/datasheet/1027.pdf
Greetings
/Hugo
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.