I've got way too much stuff in my garage. I tried to get rid of this before my move last year, but couldn't get my act together, so just crammed it into my garage. Now, time to let some stuff go.
I've got two batches.
-the first batch is the entire lot. I don't really want to separate because I want it all to go...
-the second batch is in the next post.
-----
Dayton
RS180 8 ohm shielded pair
RS315HF-4 12” Sub single
RS315 prototype single (this and the one above are very similar, but I can't say if they are identical. It's a long story. PM if you are interested.)
RS 10” prototype RS Sub single shorting ring single
RS 10 RS series sub 2 shorting coils pair
RS225 8 not shielded single
RS28A 4 ohm three
RS28F 4 ohm single
RS52 midrange pair
Dayton dome mid 285-010 pair
TB W5-1685 5” underhung pair
Morel MDT55 pair
(but one has irregular impedance curve so I would imaging FR is suspect)
ZaphAudio ZA14 pair
Viva XG18WH00 pair
Peerless HDS 5” 831883 pair
Hales (Vifa D26AG-38-04) three
Seas Excel T25 C003 one
SS D3004/6600 single
Sub cabinets with 12” cutout maple finish fair condition (cutouts work for the venerable Peerless 830500 or equivalent size) pair
Everything in this post, all as a single lot is $500 for pickup from Lincoln CA.
I’m loath to break anything up out of this lot. If you’re dying to see impedance curves and pictures, I can run a few impedance curves with Cliowin. But, er, don’t ask to run curves for everything. The whole idea is for me not to wast a lot of time with this lot… The only driver that I know is a bit suspect is one of the Morel MDT55’s. (I did actually run curves for pretty much everything here...just can’t find the files…)
Every week the lot doesn’t sell, I’ll drop the price $100… Yes, in 5 weeks it will be free…
I've got two batches.
-the first batch is the entire lot. I don't really want to separate because I want it all to go...
-the second batch is in the next post.
-----
Dayton
RS180 8 ohm shielded pair
RS315HF-4 12” Sub single
RS315 prototype single (this and the one above are very similar, but I can't say if they are identical. It's a long story. PM if you are interested.)
RS 10” prototype RS Sub single shorting ring single
RS 10 RS series sub 2 shorting coils pair
RS225 8 not shielded single
RS28A 4 ohm three
RS28F 4 ohm single
RS52 midrange pair
Dayton dome mid 285-010 pair
TB W5-1685 5” underhung pair
Morel MDT55 pair
(but one has irregular impedance curve so I would imaging FR is suspect)
ZaphAudio ZA14 pair
Viva XG18WH00 pair
Peerless HDS 5” 831883 pair
Hales (Vifa D26AG-38-04) three
Seas Excel T25 C003 one
SS D3004/6600 single
Sub cabinets with 12” cutout maple finish fair condition (cutouts work for the venerable Peerless 830500 or equivalent size) pair
Everything in this post, all as a single lot is $500 for pickup from Lincoln CA.
I’m loath to break anything up out of this lot. If you’re dying to see impedance curves and pictures, I can run a few impedance curves with Cliowin. But, er, don’t ask to run curves for everything. The whole idea is for me not to wast a lot of time with this lot… The only driver that I know is a bit suspect is one of the Morel MDT55’s. (I did actually run curves for pretty much everything here...just can’t find the files…)
Every week the lot doesn’t sell, I’ll drop the price $100… Yes, in 5 weeks it will be free…
Batch 2...
Everything below offered at 40% of new with a fresh impedance curve and pictures for each driver (that is to say, I will send a pix and will run you a new impedance curve if you ask…) All pickup only. Price for drivers below unlikely to drop at this time super soon…
Hiquphon OW2 pair
SS 8554W single
SS 12M4631 pair
SS 13M/8636 pair
SS 15M4831G00 pair
SS 18W/8545 pair
SS 18W/8535 pair
SS 21W/8555 pair
Seas L26 three
Seas Excel W21 EX002 pair
----------------------------------------------------------------------------------
Raven R1 old style with outboard xfmrpair
-Not sure what to do with this oddity. Bought it ~15 years ago. Looks fine. Problem is, it would take some time to find out how to wire the odd outboard transformer. Orca is still around. You could email them if an old school Raven R1 is your thing…
I also have a one year old, but essentially unused Pangea Vulcan 4 shelf audio rack. Also 40% so $80. But if you buy anything else, I’ll toss this in for $50
https://www.audioadvisor.com/new-pgvulrk-blk-blk?sku=NEW-PGVULRK-BLK-BLK
I need to get rid of all this stuff!
MarkK
Everything below offered at 40% of new with a fresh impedance curve and pictures for each driver (that is to say, I will send a pix and will run you a new impedance curve if you ask…) All pickup only. Price for drivers below unlikely to drop at this time super soon…
Hiquphon OW2 pair
SS 8554W single
SS 12M4631 pair
SS 13M/8636 pair
SS 15M4831G00 pair
SS 18W/8545 pair
SS 18W/8535 pair
SS 21W/8555 pair
Seas L26 three
Seas Excel W21 EX002 pair
----------------------------------------------------------------------------------
Raven R1 old style with outboard xfmrpair
-Not sure what to do with this oddity. Bought it ~15 years ago. Looks fine. Problem is, it would take some time to find out how to wire the odd outboard transformer. Orca is still around. You could email them if an old school Raven R1 is your thing…
I also have a one year old, but essentially unused Pangea Vulcan 4 shelf audio rack. Also 40% so $80. But if you buy anything else, I’ll toss this in for $50
https://www.audioadvisor.com/new-pgvulrk-blk-blk?sku=NEW-PGVULRK-BLK-BLK
I need to get rid of all this stuff!
MarkK
A week has gone by.
So, $100 off the batch for the first post.
That is, everything in the first post, the entire lot now $400... And I'll throw in the Pangea audio rack as well...
No changes to the second batch
Mark
So, $100 off the batch for the first post.
That is, everything in the first post, the entire lot now $400... And I'll throw in the Pangea audio rack as well...
No changes to the second batch
Mark
Hi Ucla88,
could i please purchase the Hales (Vifa D26AG-38-04).
I recently acquired a set of Hales Transcendence 5 Speakers with damaged tweeters, and those happen to be the exact tweeter from those speakers.
Regards
Dan
could i please purchase the Hales (Vifa D26AG-38-04).
I recently acquired a set of Hales Transcendence 5 Speakers with damaged tweeters, and those happen to be the exact tweeter from those speakers.
Regards
Dan
Hi Dan,
I'll send you some photos and some impedance curves when I have some time on Sunday, and then you can decide. I haven't tested these out in a while. Since folks aren't breaking down the doors to buy the lot, yeah, I'll part it out. especially the smaller drivers. Shipping is reasonable.
Mark
I'll send you some photos and some impedance curves when I have some time on Sunday, and then you can decide. I haven't tested these out in a while. Since folks aren't breaking down the doors to buy the lot, yeah, I'll part it out. especially the smaller drivers. Shipping is reasonable.
Mark
PS
So I may be getting rid of the Hales/Vifa, and someone is also interested in the underhung TB and RS28A's.
everything else in the first lot is still up for sale, $300 or best for the lot...(not counting the Hales/TB/RS28A)
for the second group, sigh, ebay... I hate ebay....
PS not really looking to make a killing off of these. Just want them to go to a good home.
So I may be getting rid of the Hales/Vifa, and someone is also interested in the underhung TB and RS28A's.
everything else in the first lot is still up for sale, $300 or best for the lot...(not counting the Hales/TB/RS28A)
for the second group, sigh, ebay... I hate ebay....
PS not really looking to make a killing off of these. Just want them to go to a good home.
Hi Mark,
I thought I'd let you know that you can skip checking the impedance curve if you like as I believe those are the exact model of tweeter out of the Hales Transcendence Five Speakers that I own, though would you be able to DM me with a picture of them. I have been wishing to send you a DM for since yesterday to converse in a more private manor, but unable to because I only joined this site yesterday.
I very much wish to restore these old rare speakers to their former glory.
Cheers
Dan
I thought I'd let you know that you can skip checking the impedance curve if you like as I believe those are the exact model of tweeter out of the Hales Transcendence Five Speakers that I own, though would you be able to DM me with a picture of them. I have been wishing to send you a DM for since yesterday to converse in a more private manor, but unable to because I only joined this site yesterday.
I very much wish to restore these old rare speakers to their former glory.
Cheers
Dan
Hi Mark,
If its not too much trouble I wouldn't mind seeing that impedance curve now, I am starting to question if they are the "exact" ones as Hales apparently had a modified set of Vifa D26AG-38-04 with higher power handling capabilities.
Kindest Regards
Dan
If its not too much trouble I wouldn't mind seeing that impedance curve now, I am starting to question if they are the "exact" ones as Hales apparently had a modified set of Vifa D26AG-38-04 with higher power handling capabilities.
Kindest Regards
Dan
Sigh. Although 8545 is on outside of the box, they are actually 8546. For some reason I can't edit the post...
I wanted to through out some photos of the Ravens for a couple that were interested. these are definitely early year model with the outboard xformers...
1995 if you look carefully on the ORCA datasheet. Not quite antique, but at least, um, vintage?
1995 if you look carefully on the ORCA datasheet. Not quite antique, but at least, um, vintage?
Attachments
Last edited:
Did you happen to sell all three Hales tweeters to Dan? I bought a pair of transcendence 8's a few years back and one of them is missing a tweeter, faceplate and all, so I have been pretty desperate to find a replacement for it. I already have to replace the woofers as well so replacing the voice coils on them with what madisound's recommends wouldn't be the end of the world if I could only get a faceplate and chassis. Or if you have a way to contact Dan that would be much appreciated. I can't seem to figure out how to DM him.
Thank you,
Philip
Thank you,
Philip