Henrik just arranged a projector.
So we're down to lacking a whiteboard 🙂
LykkeDK has arranged a couple of hefty extension chords with a few outlets, so that should also be fine.
Not that I would mind another few extension chords.
Magura 🙂
So we're down to lacking a whiteboard 🙂
LykkeDK has arranged a couple of hefty extension chords with a few outlets, so that should also be fine.
Not that I would mind another few extension chords.
Magura 🙂
Maybe we should have a parts exchange bazaar as well?
Personally I have a substantial amount of part, that sure won't find a place in an amp all of them.
What do you say?
Magura 🙂
Personally I have a substantial amount of part, that sure won't find a place in an amp all of them.
What do you say?
Magura 🙂
Yes OK Magura - let us see your stuff and see if it's something we can use.
If somebody else have stuff they think they can spare - bring it!
It doesn't need that much organising - just a table to put it on, and then you can bring whatever you want to sell or trade, put a note on it, and then people can check it out for themselves in between workshops. Thats it!
If somebody else have stuff they think they can spare - bring it!
It doesn't need that much organising - just a table to put it on, and then you can bring whatever you want to sell or trade, put a note on it, and then people can check it out for themselves in between workshops. Thats it!
Maybe it would be smart, if people tells what they are in need of, as I guess most of us has too much surplus stuff to bring it all.
Then we could bring what each other needs.
I would need a truck and a few people to help if I had to bring all my stuff 😉
Magura 🙂
Magura 🙂
Then we could bring what each other needs.
I would need a truck and a few people to help if I had to bring all my stuff 😉
Magura 🙂
Magura 🙂
Ok, I for one would like to narrow down, what should be brought to the "parts exchange pool".
So please chime in.
A few pointers of what I have laying around in quantity:
Heatsinks
Resistors in just about any odd value above 10R, more than the E96 row. From 0.25W to 2W.
Wire of different types, both silicone and teflon insulated.
Magnet wire of just about any diameter.
Loads of the hard to come by types of JFET's (LU1014, 2sk369....)
Rifa peh 169 electrolytics
25.8mm phase plugs
5mm impregnated glass insulation.
Huge pp in oil caps
Directional graphite for heat spreaders.
Plus loads more, so if you're in need of something, grab your parts bin, and let's see if we can swap.
The little detail about this: I need a pointer about what you're interested in from my "parts bin", as the entire load is not going to be brought to the event.
Perhaps you could also post your surplus list.
Magura 🙂
So please chime in.
A few pointers of what I have laying around in quantity:
Heatsinks
Resistors in just about any odd value above 10R, more than the E96 row. From 0.25W to 2W.
Wire of different types, both silicone and teflon insulated.
Magnet wire of just about any diameter.
Loads of the hard to come by types of JFET's (LU1014, 2sk369....)
Rifa peh 169 electrolytics
25.8mm phase plugs
5mm impregnated glass insulation.
Huge pp in oil caps
Directional graphite for heat spreaders.
Plus loads more, so if you're in need of something, grab your parts bin, and let's see if we can swap.
The little detail about this: I need a pointer about what you're interested in from my "parts bin", as the entire load is not going to be brought to the event.
Perhaps you could also post your surplus list.
Magura 🙂
I could maybe be interested in some big electrolytics and heatsinks.
Maybe you could take a picture of the heatsinks and post it - then you dont have to bring them all.
Maybe you could take a picture of the heatsinks and post it - then you dont have to bring them all.
As I recall, around 80mm.
They actually are quite nice. I have used them for the pre you can see the prototype of, below the heatsinks in one of the pics.
Magura 🙂
EDIT: They're 83mm tall.
They actually are quite nice. I have used them for the pre you can see the prototype of, below the heatsinks in one of the pics.
Magura 🙂
EDIT: They're 83mm tall.
Last edited:
Magura
Yes prototyping stuff is a cool topic.
BTW: I am not sure I am gonna 'bite' on your very nice heatsinks. So don't drag them all there for my sake
Yes prototyping stuff is a cool topic.
BTW: I am not sure I am gonna 'bite' on your very nice heatsinks. So don't drag them all there for my sake
Then I'll give a talk about that. I guess it could be coupled with the talk about tooling and construction.
I'll leave the heatsinks at home under any circumstances, as there will be a spot in the schedule, that says : visit Mr. and Mrs. Magura, cause I simply can't move those new amps to the place of the event.
So anybody interested will be invited for a quick listening session.
Magura 🙂
I'll leave the heatsinks at home under any circumstances, as there will be a spot in the schedule, that says : visit Mr. and Mrs. Magura, cause I simply can't move those new amps to the place of the event.
So anybody interested will be invited for a quick listening session.
Magura 🙂
These things do tend to grow, and keep getting better. I took some of your advice, and this year at Burning Amp we are going to have 4 listening rooms, a "Hospitality Room"
ie beer and wine consumption area 😉 and a 100 person room for presentations!
That's the way to go. They have done it like that in Sweden for many years, with great success I may add 🙂
I have though decided against my own advice (should make a few alarm bells go of), but have found a relatively big room, with good acoustics instead. This is though mainly because I sure don't expect 200+ participants.
The place where the event is held, does have several smaller rooms available, for next year that will be useful.
Magura 🙂
I have though decided against my own advice (should make a few alarm bells go of), but have found a relatively big room, with good acoustics instead. This is though mainly because I sure don't expect 200+ participants.
The place where the event is held, does have several smaller rooms available, for next year that will be useful.
Magura 🙂
- Status
- Not open for further replies.