Hello All,
2 PDF treating:
. Regulator testing
A comparative overview of power supply regulator designs with
listening tests by John Walton
.like Quasimodo
The Link Between The Phase Margin And The Converter Transient Response by
Christophe BASSO
may be interesting for some one
Regards
Ch
2 PDF treating:
. Regulator testing
A comparative overview of power supply regulator designs with
listening tests by John Walton
.like Quasimodo
The Link Between The Phase Margin And The Converter Transient Response by
Christophe BASSO
may be interesting for some one
Regards
Ch
I agree that first article should be read by every member visiting this forum section, but I’m not sure if it its copyright has expired. It is still available for purchase at Linear audio site:
Linear Audio | your tech audio resource
Fact that it is also available as open link at the same site adds to the confusion:
https://linearaudio.nl/sites/linearaudio.net/files/v4%20jdw.pdf
😕
Linear Audio | your tech audio resource
Fact that it is also available as open link at the same site adds to the confusion:
https://linearaudio.nl/sites/linearaudio.net/files/v4%20jdw.pdf
😕
Second article is pure gem. Thank you for that.
I take LTSpice phase margin calculation only as approximate value and don’t have equipment to measure actual one. As I can measure transient response, given method is very useful.
Now I have double confirmation that phase margin on actual design is very good.
I take LTSpice phase margin calculation only as approximate value and don’t have equipment to measure actual one. As I can measure transient response, given method is very useful.
Now I have double confirmation that phase margin on actual design is very good.