The Dali 104 was a great sales success. It happens to be not dissimilar to the Living Voice MTM that appeared some time later. The bass drivers from Vifa are recognizable in various speakers, including Mission, QLN Qubic 121, Audio Note AX-2, Troels C17 variants and others. Here I want to share a recipe for a speaker that is very similar to the AX-2. It has already been built in several copies and was well received.
The crossover differ a little bit from the original, but on the pleasant side according to listeners.
The dimensions of the cabinet are identical to the original. There is a bracing between front and rear panel located under the tweeter. Port dimension is dia 3 x 10cm. The 1.33mH coil is wounded down from a 1.5mH coil.
The resistance in the coil must not fall below 0.4 ohms.
The crossover differ a little bit from the original, but on the pleasant side according to listeners.
The dimensions of the cabinet are identical to the original. There is a bracing between front and rear panel located under the tweeter. Port dimension is dia 3 x 10cm. The 1.33mH coil is wounded down from a 1.5mH coil.
The resistance in the coil must not fall below 0.4 ohms.
Last edited:
