I went a little crazy in the last couple of months starting projects to get rid of spare parts and I just do not have the funds to move forward and complete the projects I started, so my loss is your gain. Please message for more pictures or questions. I would prefer to ONLY sell CONUS ONLY right now.
Build Parts for F6 below:
Includes completely stuffed PCB boards with Larger Super Through caps & Jensen transformers (soldered some small resistors to bottom of boards to make room for larger caps) - UNTESTED
Toshiba Matched JFETS Installed!
Power Supply board with Panasonic Snap ins (60,000 per rail) - UNTESTED
4x IRFP140s and blue LEDS Not installed
ANTEK AS-4218 transformer
2 35A Bridge Diodes
Panel Mount RCAs - not shown in pics
Shurter IEC socket w/out fuse cap (Amazon sent me three of these without fuse cap which they reimbursed me for all of them. I just used heat shrink to hold the fuses in place with no issues on 2 of my amps) - not shown in pics
Asking $300+shipping. Just need to buy a Chassis, keratherm, wiring and banana posts.
Build Parts for F6 below:
Includes completely stuffed PCB boards with Larger Super Through caps & Jensen transformers (soldered some small resistors to bottom of boards to make room for larger caps) - UNTESTED
Toshiba Matched JFETS Installed!
Power Supply board with Panasonic Snap ins (60,000 per rail) - UNTESTED
4x IRFP140s and blue LEDS Not installed
ANTEK AS-4218 transformer
2 35A Bridge Diodes
Panel Mount RCAs - not shown in pics
Shurter IEC socket w/out fuse cap (Amazon sent me three of these without fuse cap which they reimbursed me for all of them. I just used heat shrink to hold the fuses in place with no issues on 2 of my amps) - not shown in pics
Asking $300+shipping. Just need to buy a Chassis, keratherm, wiring and banana posts.
