8 pin din for kenwood

[WHEELS]

I have purchased an older kenwood kac 8070 off of ebay and the jack@^% I purchased it from left out the fact that it did not include the din cord. I have searched hi and low to find one and now I have to resort to begging for your help.... It is a 8 pin cable to rca. I have found out that the item # is E30-1477-08. Any help would be greatly appreciated!!!! Thank you for any help or advice you may have!!
Thanx!!
Michael in Woodstock, Ga
mlk327ga@aol.com

 

[Perry Babin]

http://www.kenwoodparts.com/

It appears they have it in stock.

 

[tsmith1315]

Michael, I may have one leftover. Send me an email if you want me to have a look around.

 

[jol50]

I have 4 on a kenwood EQ/xover so it is all RCA, but not sure if I have any more. I can check the pinout if you need. If it is standard old DIN you can find cables cheap for old stuff.

 

[I Am An Idiot]

If you decide to build it yourself.

 

[jol50]

I got mine from a tech I knew, he whipped them up all the time for kenwood and alpine. Why they didn't use RCA is beyond me, I still have an ancient alpine amp I love with DIN and a power light and speaker/power wires that is it. You can get the bare DIN ends, I don't know if you can get the stub RCA or just chop one. It would be easy to slap together.

 

[dablin]

kenwood kdt-99r DAT

Anybody could help me to connect my radio to amp? There are two 8 pin din con. for front and back speakers Thank You Petr

 

[Alpha 1]

Many thanks " I Am An Idiot" ,exact connexion din pin , tested to car amplifier Kenwood kac 8200 (cable self building)
For test amplifier , in the studio-laboratory , connect remote pin to positive 12 V power supply , amp is ON
For automotive , connect remote cable (small section) to remote connector radio-cd player