Hi,
Just wandered if anybody have driven a 211 with a 76. I was toying with the idea of using Gary Pimm's CCS to feed a 76. That could provide around 90V p-to-p of plate swing with 2V rms input.
Does this sound like a good idea to drive a 211 in SE mode keeping a 2-stage configuration?
Cheers,
Rada
Just wandered if anybody have driven a 211 with a 76. I was toying with the idea of using Gary Pimm's CCS to feed a 76. That could provide around 90V p-to-p of plate swing with 2V rms input.
Does this sound like a good idea to drive a 211 in SE mode keeping a 2-stage configuration?
Cheers,
Rada
Hi,
This is build by a Dutch guy called Triode Dick.
Very good designs also build by a lot of other people.
2 stage 211
His page with project (only in dutch unfortunately) :
Triode Dick projects
Greetz,
Jim
This is build by a Dutch guy called Triode Dick.
Very good designs also build by a lot of other people.
2 stage 211
His page with project (only in dutch unfortunately) :
Triode Dick projects
Greetz,
Jim
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.