Getting the vents on these for you is my next planset task, just finished the 1st pass of dFonken125.
dave
I have not looked closely at the plan-set yet. Are you saying the final setup is still being worked out? My brother wants the double 10.2 Onken, but I am talking him into hearing the new versions first. We might do the double either way, just for kicks. Do you have 10.2 stock?
The trapezoids have not yet been released (you have pre-release copies since the Ts were specifically what you were after) and only the Twin has had its ports detailed. 10.2T and 10.2TT need doing. The bother is that since i got my latest laptop only my desktop downstairs will run the sim software.
dave
dave
The drawings except the height of the vent spacers is spot on. Vent spacers are placeholders.
dave
dave
I may try and put it together in such a way as to make modifications easy. Thanks and let me know about an update. Any 10,2 stock?
Almost done! One of baffles is reversed, but is removable. I will screw together until final adjustments and decision are made. FYI. Home depot near me sells a very good quality 1/2' sanding ply. I have cu three sheets of the seven ply stuff and havent found a gap yet. Only$40.
Attachments
Last edited:
Buzz,
You got mail.
I do hope that if those are MK10.2T or TT you haven't glued anything down. If you have it looks like an after the fact fix is possible.
dave
- Status
- Not open for further replies.