Haven't made any progress on my projects lately, so I'm selling off my stash for some much needed cash:
Qty: 6
Dimensions: 9 7/8" x 6"
Fins: 1" high x 30
Base thickness: approx 1/4"
These heatsinks were cut from a large piece so there are a few rough edges that could use some finish work. I've machined the base to be perfectly flat with a milling machine so there are machining marks that you can see in the picture.
$100 for all 6 shipped to the US. Paypal only please.
Thanks for looking!
Qty: 6
Dimensions: 9 7/8" x 6"
Fins: 1" high x 30
Base thickness: approx 1/4"
These heatsinks were cut from a large piece so there are a few rough edges that could use some finish work. I've machined the base to be perfectly flat with a milling machine so there are machining marks that you can see in the picture.
$100 for all 6 shipped to the US. Paypal only please.
Thanks for looking!
Attachments
Sorry guys, had a typo in my post above. The heatsinks are larger than what I wrote: 9 7/8" x 8" not 6"
Also, I realized that I have another set available for anyone interested in 2 heatsinks. These 2 have exactly the same description as the 6 above, but are a little shorter at 9 7/8" x 6 7/8". I am asking $40 shipped to the US for this set.
Also, I realized that I have another set available for anyone interested in 2 heatsinks. These 2 have exactly the same description as the 6 above, but are a little shorter at 9 7/8" x 6 7/8". I am asking $40 shipped to the US for this set.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.