During next weeks will offer hundreds items for sale , all prices in US$ +ship . Shipping is costly , small items lower than 1kg is about $20.us , since I get a lot for sale ; grouping your purchase will help to reduce shipping cost . Buyer: all details, payment and shipping by PM please .
And don't ask me specific item , I just open box and list it ; so come see my ad time by time this way you will miss nothing . All items by number for reference , missing number are sold item , and letter after number is modification.
Sold1 A ------- USSA5 Fab power amp with quality components , 2013/313 come here on diy from a trusted member : Calvin , for out one of best pair ALF16N/ALF16P ; there is no input capacitor on board cause it is crutial to use top quality (all info pass by) but your preamp must be very low dc out .
I didn't solder driver and out depending of your heatsink choice . Presently RV1b/RV2b are 110ohm , up to you to find 1a/2a with pot ajustment.
Only one pair remain : Price is $200./pair , may offer power supply dual board (X2) with 8x 47,000uF and ixys 12A/1200v diode (8936/SOLD/B]
2 ------ SALAS DCB1 versions : all original genuine parts , no heat sink (too shipping costly) 39 ohm resistor for testing evidently you will use much lower with sink, mine on 24/7/4 years now with 4.7 ohm 10w around 54C on sink , the best of my 50 years in audio but with top cable/casing /transformer /L pad volume control/ and WBT RCA. The one with heat sink come with 9.1ohm 3w . All unit with very low dc offset.
Price : mezmerize blue $120. black $110. (( hypnotize with heatsink $80. SOLD ))(( without $70. also SOLD)) (8939)
3--SOLD------ Jung/Childress TDA1541A output board (TAA article 87/88 for Philips 650) to replace cheap 8 pins chip out in Philips/Magnavox/Hafler/Quad/Rotel/Revox/Hafler etc,/etc. . One with all possible wiring and regulators , the other one with 4 oz teflon pc board and Wonder 8.2uF cap. TDA1541 are new not remove from board .
Ready to use one$85. the teflon board one $90. (8942/8944) SOLD
5--------SOLD- Kester solder (all info on pic) great to solder PC board and as good as many after market solder if board is clean , and same for wire (from transistors, capacitors, resistors etc), with this .4mm there is no extra solder (to me the less the better for sound) on board . You need to solder bigger parts ! no problems ,have look on pic : one row of wire for pc , 2 row good for 18 awg, 3 row up to 14 awg and 4 row good for anything . Flux at 3.3% is very active and this the reason why mutiple row are effective... but please ,please, please don't twist this solder with bare hands... use thin glooves, 12 to 16 in. is good lenght to work.
Last but not least ! all those new circuit board without pb are not easy to work when come time to replace parts... use few drop of this solder will greatly help .
Price $28.per roll, $75. for 3 rolls. SOLD ALL SOLD
7A--- ALL SOLD---- of my offer JVC31B of 5 unit , 4 are sold 1 remain( now, shipping whole unit is too costly , so I offer partsout : laser mech. with remote $85. price postpaid is valid USA conus or Canada . Last one ! last chance (8995) ALL SOLD
8---------Castle Stirling 16 ohm woofer brand new 4x $120. 8x $200. (4 003)
9-------- Vishay S102K 1K $3.00 each , 24pcs at $2.80 ea 48pcs at $2.60 and $250. /100pcs (8763)
10-------2x brand new tone control board HK 600 $50. without knob $44. sold many for pot (out of production since long time and cost non sense $$$ on bay . (7331)
12------- 2x C540H (see date on it) Price $25.pair (8005)
13------- 3x OPA 549T $45. (8008)
14-----4x fet dual power 2x ALF16N + 2x ALF16P brand new from element 14 some years ago . Out of production since few years $95.
(8755)
16-----2x sealed power supply +/- 15vdc ; same as used by ML on early preamp model $30. pair (1 002)
17------4x Vishay 1280G 5k/ .75w /15T , one of best to ajust bais 4pcs $40. (8100)
18------Acoustat 2+2 $1300. vg condition ; I am 60 miles away from north VT/NY far east
19------Soldering desoldering station 2 Pace gun , 3 x soldering/desoldering 60w and one 70w , new heater + few other parts
the only need is a small compressor, a bargain at $240. (8977 - 8979 -- 8982 )
20------.1uF 400v VG sound 50pcs $50. (8033)
22A-----shigaclone black MK2 , brand new boxed since may be around 8/10 years . Just open to take pic, I guessit's good for experimented diy $150.
new offer ! at this price the MK2 black will come with new 16pin drive and JVC original puck .
(9049--9070---9080) pic will comeASAP
And don't ask me specific item , I just open box and list it ; so come see my ad time by time this way you will miss nothing . All items by number for reference , missing number are sold item , and letter after number is modification.
Only one pair remain : Price is $200./pair , may offer power supply dual board (X2) with 8x 47,000uF and ixys 12A/1200v diode (8936/SOLD/B]
2 ------ SALAS DCB1 versions : all original genuine parts , no heat sink (too shipping costly) 39 ohm resistor for testing evidently you will use much lower with sink, mine on 24/7/4 years now with 4.7 ohm 10w around 54C on sink , the best of my 50 years in audio but with top cable/casing /transformer /L pad volume control/ and WBT RCA. The one with heat sink come with 9.1ohm 3w . All unit with very low dc offset.
Price : mezmerize blue $120. black $110.
Ready to use one$85. the teflon board one $90. (8942/8944) SOLD
Price $28.per roll, $75. for 3 rolls. SOLD ALL SOLD
8---------Castle Stirling 16 ohm woofer brand new 4x $120. 8x $200. (4 003)
9-------- Vishay S102K 1K $3.00 each , 24pcs at $2.80 ea 48pcs at $2.60 and $250. /100pcs (8763)
10-------2x brand new tone control board HK 600 $50. without knob $44. sold many for pot (out of production since long time and cost non sense $$$ on bay . (7331)
12------- 2x C540H (see date on it) Price $25.pair (8005)
13------- 3x OPA 549T $45. (8008)
14-----
(8755)
16-----2x sealed power supply +/- 15vdc ; same as used by ML on early preamp model $30. pair (1 002)
17------4x Vishay 1280G 5k/ .75w /15T , one of best to ajust bais 4pcs $40. (8100)
18------Acoustat 2+2 $1300. vg condition ; I am 60 miles away from north VT/NY far east
19------Soldering desoldering station 2 Pace gun , 3 x soldering/desoldering 60w and one 70w , new heater + few other parts
the only need is a small compressor, a bargain at $240. (8977 - 8979 -- 8982 )
20-----
22A----
new offer ! at this price the MK2 black will come with new 16pin drive and JVC original puck .
(9049--9070---9080) pic will comeASAP
Attachments
Last edited:
Where are you located? I live in Montréal would pickup be an option if I purchase anything?
In about 10 years it will be probably my turn to sell ton of stuff accumulated in my DIY journey... I've shown this thread to my wife and she agreed.
SB
SB
At least you are able to look yourself in the mirror and predict the future, sadly most of us are not able to do that.
R
R
Wow ogie ! don't push too much , I am 77 , and just hope most member here will be able to do as much as me at this age 😉
Shig. parts arrived safely. Nicely disassembled and very well packed.
Finally get to build one.
These parts don't come up very often so I feel lucky to get one.
Thanks!
Finally get to build one.
These parts don't come up very often so I feel lucky to get one.
Thanks!
Got all the parts I ordered delivered to my door, thanks Pierre.
sB
sB
Hello Praudio, I got you. 😉
Lots of stuff here and some sold. I'm watching few of them and see if they fit.
Thanks.
Lots of stuff here and some sold. I'm watching few of them and see if they fit.
Thanks.
Last edited: