Apologies for the radio silence on this project. Basically, I've only had interest around 40 pieces, and with the MOQ requiring around €4,000, i can't currently justify the investment.
I'm quite positive that these would represent a good investment, but finding funding, even for rock-solid investments right now is pretty tough....
If a 100 piece requirement fell into my lap, I'd get straight on with it, but as it stands right now, I think I'm still 4 or 5 months away from commiting to this project.
I will keep you updated on developments on this....
I'm quite positive that these would represent a good investment, but finding funding, even for rock-solid investments right now is pretty tough....
If a 100 piece requirement fell into my lap, I'd get straight on with it, but as it stands right now, I think I'm still 4 or 5 months away from commiting to this project.
I will keep you updated on developments on this....
fine 😉, in the mean time I need 4 4700rifa that you have and is possible to have matched pair 0.1uf for riaa, ampohm oil or wax ?
nicoch46 said:fine 😉, in the mean time I need 4 4700rifa that you have and is possible to have matched pair 0.1uf for riaa, ampohm oil or wax ?
No problems on the PEH169 4700uF caps.
Matched pairs are absolutely no problem. I'll even do the matching at no extra cost.
Send me an email with exact requirements to:
MatthewCampbell@AudioCap.Net
I'll email you back with the closest pair(s) I have to hand...
Cheers,
Matthew
musical said:If it is 20000uF, I'll be very interested. Do they come in this size?
Do you mean the four-poles or the PEH169's?
Matthew
MCampbell said:
Do you mean the four-poles or the PEH169's?
Matthew
the four-poles.
- Status
- Not open for further replies.
- Home
- Group Buys
- 4-pole Electrolytics 10000uF/63V $23 +