• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

3886inv gainclone PCB,group buy

Status
Not open for further replies.
Jump to Latest
digi01

digi01

Member
Joined 2003
assemblycraft.com
#1
the 3886IGC boards detail here: 3886IGC
specifications:
🙂 high quality PCB,made in BEIJING CHINA.
😀 double side board,the PCB size is 1.8 x 1.72 inch.
😉 Caps, diameter max=20mm,2mm holes.
😎 single channel design,2 boards for stereo amp.
:smash: $4USD per board.
🙄 shipping cost is $6USD,by air to anywhere.
😀 10 sets(20 piece) is available.

can place order via mail vcgft@yahoo.com.cn
for payment,paypal is welcome.

BTW,the regulator PCB is available at the same time.
specifications:
🙂 high quality PCB.
😀 double side board,1.8 x 1.72 inch.
😉 big filter cap,diameter max=32mm,2mm holes.
😎 2 boards for +/- rail power.purpose for general use.
:smash: $4USD per board.
😀 10 sets(20 piece) is available.
project detail here: regulator psu.


regards
digi
 
#2
You can run your show in the way you like but I recommend you to create a wiki page. It will be easier both for you and your customers to keep track of things. I think the unspoken rule is to keep things rather open when it comes to group deals. I think you have done a fine job and the board deserves to be offered to a wider audience. :nod:

Why don't you just copy the structure of this page?
http://www.diyaudio.com/wiki/index.php?page=Sj%F6str%F6m+Super+Regulator
 
#7
KT said:
All regulator boards are accounted for, and we have gone over some!

If you stop taking orders for the regulators at this point, I hope there are some extras for the overrun?

Thanks,
KT
Click to expand...

Really,it seems the design in general use is more popular😀
OK,then I will supply some extras for the overrun.

I will accept order from today till October 10.

regards
 
#10
😉

oh,finished.

reg-hook.gif


digi
 
#11
here are 3886inv gianclone partlist.

🙂3886igc,1 PCB parts:
1000uf/50v *2
220k 1/2w *1 (gain setting)
10k 1/2w *1 (gain setting)
20k 1/4w *1 (mute)
LM3886 *1
0.1 , 5w *1 (option,output)
220k trim *1 (option,dc offset)
heat sink,screw,hook wires.


Regulator +/-rail,2 PCBs parts:
diode ,mur860 *8
1n4004 *2
LM338 *2
100n film cap *2
6800uf/50v *2
10uf/50v *2
100uf/50v *2
120 ohm 1/4w *2
2.2k 1/4w *2 (or 2.2K trim,output voltage adjust)
heat sink,screw,hook wires.
 
#12
Here's the list of 3886INV and Regulator board groupbuyers:

digi01 China inv*4,regulator*4
tschrama Netherlands inv*4,regulator*4
Max Williams New Zealand inv*0,regulator*2
GaryB USA inv*0,regulator*4
KT USA inv*0,regulator*8
moving_electron USA inv*4,regulator*4
BrianGT USA inv*4,regulator*8

I will accept order till October 10.
 
#17
digi, isn't it a good idea to write the delivery date in the wiki page? I think my idea is very good, don't you think so too? I'll guess you will avoid my emails and posts here about this very simple thing.

I recommend all of you group buy organizers to have a column for recieved payment and one for delivery.
 
Status
Not open for further replies.
Top Bottom