hy guysl
I want to ask if u build an amplifier that is supplied to +-37V and uses 2n3055 tranzistors complementary disposed . Please help me with a schematic of this amp and maybe the PCB if you have one as quickly as possible.I also want to ask which is the difference between 2n3055 and KT818 because
i didn't fount any datasheets about KT818.
Thanks .
All the best!
I want to ask if u build an amplifier that is supplied to +-37V and uses 2n3055 tranzistors complementary disposed . Please help me with a schematic of this amp and maybe the PCB if you have one as quickly as possible.I also want to ask which is the difference between 2n3055 and KT818 because
i didn't fount any datasheets about KT818.
Thanks .
All the best!
is that possible?? seems like you are going over or near the SOA of that output transistor (2N3055)...anyway here is a design...pretty standard by now.
http://sound.westhost.com/project03.htm
There is an updated project with PCBs available at this page.
http://sound.westhost.com/project3a.htm
Here you go...
http://sound.westhost.com/project03.htm
There is an updated project with PCBs available at this page.
http://sound.westhost.com/project3a.htm
Here you go...
- Status
- Not open for further replies.