A good beer, that is a good idea 😎 I'm stuck into an hotel room without air conditioning and the air is really warm and humid (normal Quebec summer weather, rain and bugs). Just talked to my wife back at home and still didn't receive the pulleys.
Robmil
If you complain about the London weather,then I should inform you that our summer here in Toronto,was the worst ever.Rain,rain and more rain.It actually broke a record for the most rainfall.Damn it rained every day this summer with the exception of maybe 5-8 dry days so far.
Algar is exceptional and needs to be praised for his efforts.He treated me with a lot of respect.Thanks Algar.
George
If you complain about the London weather,then I should inform you that our summer here in Toronto,was the worst ever.Rain,rain and more rain.It actually broke a record for the most rainfall.Damn it rained every day this summer with the exception of maybe 5-8 dry days so far.
Algar is exceptional and needs to be praised for his efforts.He treated me with a lot of respect.Thanks Algar.
George
firstly... Algar thank you for your time.
As for Canada.... I will only go as far up as San Francisco, maybe a bit more BUT North America is really too cold and wet for me. The views I know are great....
For anyone living outside the UK... be prepared when coming here for a holiday, it's EXPENSIVE! A cup of tea will cost you about $3 and a very average tasting meal in a very average restaurant in Central London will easily cost $50 each including an average bottle of wine. If you want something better be prepared to spend $100 each BUT then it's still not as good as any of the main hotels in Malaysia's Kuala Lumpur or the level of service you get in the States - North or Central.
As for Canada.... I will only go as far up as San Francisco, maybe a bit more BUT North America is really too cold and wet for me. The views I know are great....
For anyone living outside the UK... be prepared when coming here for a holiday, it's EXPENSIVE! A cup of tea will cost you about $3 and a very average tasting meal in a very average restaurant in Central London will easily cost $50 each including an average bottle of wine. If you want something better be prepared to spend $100 each BUT then it's still not as good as any of the main hotels in Malaysia's Kuala Lumpur or the level of service you get in the States - North or Central.
robmil said:
I wish S.F. was north of the border. We would have decent, affordable healthcare! Actually, Canada is quite a bit further north. 😀
We do however have a thriving DIY community in the Bay Area! Follow the link:
http://www.burningamp.com/
Still didn't receive the pulleys, sent an email to Greg.
I should be able to ship the few orders that don't include a pulleys.
I still have in stock a few pulleys from the 2007 GB pulley replacement.
I'll be able to ship these as well.
I'll keep you posted.
I should be able to ship the few orders that don't include a pulleys.
I still have in stock a few pulleys from the 2007 GB pulley replacement.
I'll be able to ship these as well.
I'll keep you posted.
Contacted Greg. Pulleys were shipped only on last Friday, Aug 22nd
Should be here on today or tomorrow.
Will ship today Greg Nuspel (1 motor only) and Klimek (1 pcb only)
More to come everyday. Check your email.
Thanks...
SB
Should be here on today or tomorrow.
Will ship today Greg Nuspel (1 motor only) and Klimek (1 pcb only)
More to come everyday. Check your email.
Thanks...
SB
I made a new doc, version 1.5 that contains a few new items into the FAQ section and a corrected schematic with R52 correction.
Bas Horneman will post it on his site shortly. Thanks...
Bas Horneman will post it on his site shortly. Thanks...
I have tried to download that file and can finish the download, but I receive a message that the file is damaged and cannot be opened.
Strange. Anyone else having problems?
Could you try again? Save it under a different name perhaps?
Tried another computer and it worked perfectly. On my laptop, i can't open with acrobat or any other PDF reader, however. Looks like it's an issue on this end.
Thanks.
Thanks.
Shipping Started:
The following kits are packed and ready to go, email sent, waiting for the shipping cost payment: AAA21, dockysmocky, fmena, and Robmil (Robmil a good way to get your parts rapidly is to pay for the shipping costs rapidly as well 😉
Shipped the following kits: Greg Nuspel, and SKlimek
In the next two days I'll be ready to ship these kits, please check your emails: damohpi, ligascon, Paudux, Spica, Toaster
Received the pulleys today but Greg forgot to send the small allen keys. They should be there shortly....
Thanks...
SB
The following kits are packed and ready to go, email sent, waiting for the shipping cost payment: AAA21, dockysmocky, fmena, and Robmil (Robmil a good way to get your parts rapidly is to pay for the shipping costs rapidly as well 😉
Shipped the following kits: Greg Nuspel, and SKlimek
In the next two days I'll be ready to ship these kits, please check your emails: damohpi, ligascon, Paudux, Spica, Toaster
Received the pulleys today but Greg forgot to send the small allen keys. They should be there shortly....
Thanks...
SB
Bas Horneman said:
Why are there two schematics (page 3 and 14) and two parts lists (page 8 and 15-16)?
tnargs, this project was originaly design by Mark Kelly, schematic page 14 and parts lists pages 15-16, are the original Mark project, the two other ones at the beginning of the documentation are for this PCB. I left Mark's info so you can compare them with mine and use some of his parts maybe instead.
Shipping Updates and My errors again:
Shipped today kits for: Damophi, DHT4ME, Toaster
But I shipped by error PCB instead of motor to Ligascon & Paudux
I'm very sorry.
I sent you email asking for you to ship me back the PCB, I'll ship your PCB.
For the records, I put my house on sale since a month, but I need to finish the basement to get the price I asked...So, I'm working late at night and all the week-ends on that. I packed the kits yesterday at night, was tired and made this stupid error. Very sorry again.
I should get the missing Allen keys by tomorrow and will resume the shipping, without error I hope. I need to close this GB as soon as possible. I'll be gone for most of September for work, so not much time left.
Shipped today kits for: Damophi, DHT4ME, Toaster
But I shipped by error PCB instead of motor to Ligascon & Paudux
I'm very sorry.I sent you email asking for you to ship me back the PCB, I'll ship your PCB.
For the records, I put my house on sale since a month, but I need to finish the basement to get the price I asked...So, I'm working late at night and all the week-ends on that. I packed the kits yesterday at night, was tired and made this stupid error. Very sorry again.
I should get the missing Allen keys by tomorrow and will resume the shipping, without error I hope. I need to close this GB as soon as possible. I'll be gone for most of September for work, so not much time left.
- Status
- Not open for further replies.