Tweeter
Woofer
For this speackers we have a project for a 2 way xoover?
An externally hosted image should be here but it was not working when we last tested it.
Woofer
An externally hosted image should be here but it was not working when we last tested it.
For this speackers we have a project for a 2 way xoover?
This one from Tony Gee is about as close as I've seen.
http://www.humblehomemadehifi.com/Optimo.html
http://www.humblehomemadehifi.com/Optimo.html
danyele said:The tweeter isn't the same.
It's possible to replace the Optimo tweeter (D2904/7000) with the D2904/7100 without change the xoover?
They are very similar indeed. But Tony Gee' it's a TL box with a series xover, if that's what you are looking for. (vs. BR and parallel xovers)
I have the 18W4531 and the R2904/70000.
I used Tony Gee's Optimo XO in a reflex box. It was not much better that the AOS Studio 35BR that I was not happy with.
I am building the Optimo TL cabinets as we speak. Work and wedding plans are interfering though. I am expecting a totally different result. The TL should add to the midrange quality also.
Old BR cabs:
TL cabs in progress:
I used Tony Gee's Optimo XO in a reflex box. It was not much better that the AOS Studio 35BR that I was not happy with.
I am building the Optimo TL cabinets as we speak. Work and wedding plans are interfering though. I am expecting a totally different result. The TL should add to the midrange quality also.
Old BR cabs:
TL cabs in progress:
Rabbitz: Thanks I will bear that in mind, but I already have a set of AOS designed BR crossovers, as well as a pair of Tony Gee's Optimo crossovers. The bass reflex cabs are already being used with different drivers (with a good result), and I have nearly completed my TL cabs for the Scanspeak drivers. I will let you know the results.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Loudspeakers
- Multi-Way
- 2 way xoover for scan speak 18w4531 and D2904/7100