Hi,
like my past post suggest,i'm tihnking to build a spekaer with scan-speak drivers.
the candidates for woofer are :
- 18w8545-00
- 18w8545-k
- 18w8546
the candidate for tw is :
- d9900 revelator
it must be in dappolito configuration.
the loudspeaker must be 2 way and 3 speakers (the 2 wf crossed at the same
frequency with the tw).
this is an idea for this project.....i'm thinking about it.
someboby of you does projected a think like this with the speakers i mentioned ?
some project in web already done ?
please advise me.
thank you
regards
like my past post suggest,i'm tihnking to build a spekaer with scan-speak drivers.
the candidates for woofer are :
- 18w8545-00
- 18w8545-k
- 18w8546
the candidate for tw is :
- d9900 revelator
it must be in dappolito configuration.
the loudspeaker must be 2 way and 3 speakers (the 2 wf crossed at the same
frequency with the tw).
this is an idea for this project.....i'm thinking about it.
someboby of you does projected a think like this with the speakers i mentioned ?
some project in web already done ?
please advise me.
thank you
regards
Ciao ermes
I found just that. No informations on bass tunning.
http://www.radagast.org/~dplatt/speakers/techdocs.html
Hope this helps
JC
I found just that. No informations on bass tunning.
http://www.radagast.org/~dplatt/speakers/techdocs.html
Hope this helps
JC
thank you,i already know that project,and i'm searching for another to compare it......
like this : http://www.audioxpress.com/reviews/media/AX301FL.pdf
like this : http://www.audioxpress.com/reviews/media/AX301FL.pdf
I think you know this too:
http://www.northcreekmusic.com/NorthCreekKits.html
http://www.northcreekmusic.com/rhythm/RhythmCabinet.pdf
Did you buy the drivers already?
JC
http://www.northcreekmusic.com/NorthCreekKits.html
http://www.northcreekmusic.com/rhythm/RhythmCabinet.pdf
Did you buy the drivers already?
JC
http://www.ta-on.com/mania01/net_lc.htm
http://www.ta-on.com/mania01/mania_mm01.htm
You can try Babelfish japanese > english transtation. I have no more time today for it
Good luck
JC
http://www.ta-on.com/mania01/mania_mm01.htm
You can try Babelfish japanese > english transtation. I have no more time today for it
Good luck
JC
ermes said:thank you jc,
but there is not the d9900 ,there id the d9700.....
The 97 is the 99 but with a different face plate.
ermes said:yes but is has a different frequency response.....
Surely that doesnt make any difference. I thought you were looking for designs to use around the revelator and either 45,45k or 46. If you like the design with the 97 tweeter then build that one, they are the same device.
yes but is has a different frequency response.....
It is because the Frontplate of the 9900 forms a littel Horn
ermes said:i know that !!!!!!!!!!!!
Noone is saying you dont know this, its just that you seemed reluctant to use the 97 so we are just pointing out that they are the same device.
If you're interested in SOTA sound and want to use ScanSpeak drivers, then this is a design that you can clone. The website has everything you'll need to get started, including the crossover schematic. After reading your previous posts, I knew that this was just the project for you.
I've heard these myself and they are very, very good.
Try this URL: www.theultimatemonitor.com
If you do clone these, be sure to send me the plans and I'll send you a dollar.
Best Regards,
TerryO
I've heard these myself and they are very, very good.
Try this URL: www.theultimatemonitor.com
If you do clone these, be sure to send me the plans and I'll send you a dollar.
Best Regards,
TerryO
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Loudspeakers
- Multi-Way
- 2 way dappolito with scan-speak drivers