I really need to get a scanner, but in the meantime here are some pictures... The document say it is for 4-channel but I have the 425, 225 and 250 and it works for all of them (just pretend the 2 channel amp is channels 1+2 of a 4 channel).
The ebay seller "robotunderground" has had them in the past; you might try emailing him. I do have an extra pair but I am not sure I want to sell them...
If all you want to do is bypass, you can simulate the card by taking a jumper off of the SLF-1 card and putting it on pins 1-2 and 9-10 of each channel.
Like this
If all you want to do is bypass, you can simulate the card by taking a jumper off of the SLF-1 card and putting it on pins 1-2 and 9-10 of each channel.
Like this
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- General Interest
- Car Audio
- 1st gen Orion HCCA 225