1100a² dc offset

[Perry Babin]

Anything but a fragile speaker. A dummy load will work. If you have a 120v incandescent lamp, that would be better. Just tap it at first to see if the amp draws excessive current.

 

[mnhiphop101]

Is the DC the same on both channels?

If you touch a load across the output, does the DC drain off or does it try to pull excessive current?

It pulls 1.1a at idle and 2.1 with a load

 

[Perry Babin]

What's the voltage across the load when connected?

What is the load?

Don't leave it on long enough for the outputs to heat up.