10" sub recommendation

[xecluded]

I just picked up a pair of sealed enclosures that have dimension of 13.5" wide x 16.25" deep x 27.75" height - these are 1 1/4 mdf thick . Can someone please suggest some 10" that would work well in these cabinets. thanks.

 

[bjorno]

I just picked up a pair of sealed enclosures that have dimension of 13.5" wide x 16.25" deep x 27.75" height - these are 1 1/4 mdf thick . Can someone please suggest some 10" that would work well in these cabinets. thanks.

Hi,

I found 2 Drivers that IMO should suit your Boxes for Sub use if properly Ported:

http://meniscusaudio.com/images/CSS-SDX10-data170308.pdf

In closed(~ Net. Vol.= 60L/f-3dB= ~46Hz) or Ported Boxes(~Net. 52L, Port Vol.=~ 8.8L, Port Area= 110cm^2, Length=80 cm +Bw4 HPF at ~22Hz)....Rec.#1

http://www.parts-express.com/pdf/295-414s.pdf

In closed(~ Net. Vol.=60L/f-3dB= ~51Hz) or ported boxes(Net. 52L, Port Vol.=~ 8.8L, Port Area= 110cm^2, Length=80 cm +Bw4 HPF at ~30Hz)....Rec.#2

b🙂

 

[xecluded]

Wow, i really appreciate the help. I am kind of leaning toward the Creative Sound Solutions SDX10 as the cutout hole is an exact match for the cabinets though the frame is a little large than the recessed frame on my cabinets which is 10- 5/8". Not sure how to make it fit yet.

What do you think about the Scan-Speak Discovery 26W/8534G 10" Aluminum Cone Woofer -which is a drop in replacement as far as fitting go: The Madisound Speaker Store

Thanks

 

[bjorno]

Wow, i really appreciate the help. I am kind of leaning toward the Creative Sound Solutions SDX10 as the cutout hole is an exact match for the cabinets though the frame is a little large than the recessed frame on my cabinets which is 10- 5/8". Not sure how to make it fit yet.

What do you think about the Scan-Speak Discovery 26W/8534G 10" Aluminum Cone Woofer -which is a drop in replacement as far as fitting go: The Madisound Speaker Store

Thanks

Great pick of a Driver for a Closed Box....

b🙂

 

[xecluded]

So i take it as a big thumb up? 😀. Will put in my order shortly. Many thanks for the great help 😉

 

[Inductor]

Scanspeak Discovery 26W/8534G 10"

So i take it as a big thumb up?

It's acceptable. If you're ready for the ~41Hz/F3. It may work nicely with the room gain. (This in relation to the low fr. extension only.) Two (62L) sealed speakers might give a good punch. 🙂

 

[Juhazi]

Europeans specially can consider SEAS L26 too. It sounds nice in closed boxes and it's price has come lower, but not in the category of W26!

The Madisound Speaker Store

D1001-04S - SEAS L26ROY 10 inch long stroke woofer - Europe Audio

 

[xecluded]

I have put in an order for two of these Peerless 830668 - hopefully they will work OK:

The Madisound Speaker Store