The first one is a thermistor to control inrush, can you show me one at mouser uk that I can get that would work the same.
The voltage rectifier I think is the same as this. If you could let me know. Thanks.
https://www.mouser.co.uk/ProductDetail/621-KBP06G
The voltage rectifier I think is the same as this. If you could let me know. Thanks.
https://www.mouser.co.uk/ProductDetail/621-KBP06G
Are you sure about that first one? Looks more like a ceramic cap to me, 10nF.
The bridge you show at Mouser is much larger and will not fit your board. It is also much overrated.
Look for bridges for 1A or so, with a SIL case, although those are very rare, not sure you can still get those.
Check dimensions and pin spacing against for instance this one: https://asset.conrad.com/media10/ad...uggelijkrichter-sil-4-160-v-23-a-eenfasig.pdf
Do you know the voltage coming off your transformer?
Jan
The bridge you show at Mouser is much larger and will not fit your board. It is also much overrated.
Look for bridges for 1A or so, with a SIL case, although those are very rare, not sure you can still get those.
Check dimensions and pin spacing against for instance this one: https://asset.conrad.com/media10/ad...uggelijkrichter-sil-4-160-v-23-a-eenfasig.pdf
Do you know the voltage coming off your transformer?
Jan
Last edited:
Jan
Surprise! (Looks like a ceramic cap to me also! However using one wouldn’t harm anything, but the unit wouldn’t work.)
https://www.datasheet4u.com/mobile/924752/SCK-103.html
Surprise! (Looks like a ceramic cap to me also! However using one wouldn’t harm anything, but the unit wouldn’t work.)
https://www.datasheet4u.com/mobile/924752/SCK-103.html
You should be able to find a replacement with the resistance and power data for the original one in its data sheet. 10 ohms, 3A, 17W.
Mouser has these: https://www.mouser.be/c/circuit-pro...A&mounting style=PCB Mount&resistance=10 Ohms , you should be able to take it from there.
Jan
without schematic for the asked parts both ceramic capacitor and NTC (thermistor for inrush current limiting) is possible. In the meantime there are a very wide range of SMD parts to find without any letters (e. g. ceramic capacitors) or only values without brand name resp. logo (electrolytic capacitors).
According the attached image here most probably part from first image post #1 it is a NTC - like find under
https://imall.com/product/NEW-10PCS...ed/aliexpress.com/32744516051/567-30668212/en
and
https://www.yoycart.com/Product/214397529/
