Welcome to the forum!
You are showing the crossover for the Linaeum tweeter.
It is a very simple crossover circuit with a good quality film capacitor and a ferrite cored inductor, along with a lamp to protect the tweeter from overload.
EDIT: I presume you are considering building this crossover from components rather than buying it at auction?
You are showing the crossover for the Linaeum tweeter.
It is a very simple crossover circuit with a good quality film capacitor and a ferrite cored inductor, along with a lamp to protect the tweeter from overload.
EDIT: I presume you are considering building this crossover from components rather than buying it at auction?
Here's a better picture showing the component values. Looks like an 8.2 uF capacitor and a 0.9 mH inductor.
Ok, I'm not that up on parts. Could you ir someone please give me a part number from parts express that will work better than this stock crossover. Or should I leave it? Thanks in advance and forgive me for my inexperienced...
If you actually have the crossover unit shown in post #3, I suggest you stick with it.
You will not find a ready made crossover from Parts Express that will work better with your drivers.
You will not find a ready made crossover from Parts Express that will work better with your drivers.
The circuit is where the differences are, and for example you could measure and refine the filtering. If that's not your thing you may be interested in equalising?