FS: TKD Stereo 50K Linear Taper Potentiometers PRICE DROP!
I have a few TKD potentiometers available. All of them are dual linear taper 50K resistance made with conductive plastic. These have been installed once, but never used. Pricing is $60 for the 2CP-2500 (25mm size) type and $25 for the 2CP-601 (16mm size) type.
As of 04/02/2025:
QTY: 17pcs 2CP-601 50k
https://www.tkd-corp.com/en/products/pot/cp600p-spec.html
QTY: 1pcs 2CP2500-P
https://www.tkd-corp.com/en/products/pot/cp2500p-spec.html
Shipping in the USA is $5 via USPS and outside of the US will be rated based upon location.
I have a few TKD potentiometers available. All of them are dual linear taper 50K resistance made with conductive plastic. These have been installed once, but never used. Pricing is $60 for the 2CP-2500 (25mm size) type and $25 for the 2CP-601 (16mm size) type.
As of 04/02/2025:
QTY: 17pcs 2CP-601 50k
https://www.tkd-corp.com/en/products/pot/cp600p-spec.html
QTY: 1pcs 2CP2500-P
https://www.tkd-corp.com/en/products/pot/cp2500p-spec.html
Shipping in the USA is $5 via USPS and outside of the US will be rated based upon location.
Attachments
Last edited:
IM looking to buy two for the left gain and right gain on my SP-14 preamp. it looks like this:
im a little confused by thr use of the word "linear". im aware of two types of potertiometers:
1 - linear: that usually has many many turns and we never use in stereo equipment
2 - logarithmic: that only has one turn and we do use in stereo
so is this TDK not logarithmic?
im a little confused by thr use of the word "linear". im aware of two types of potertiometers:
1 - linear: that usually has many many turns and we never use in stereo equipment
2 - logarithmic: that only has one turn and we do use in stereo
so is this TDK not logarithmic?
Hi,
At a glance; it looks like the TKD will work for the left/right gain on the SP14. You’ll just be using one side of each control to make it work. Send me a message if you need a little more explanation.
Here’s a breakdown of potentiometer curve types:
Potentiometer taper - audio taper >> Resistor Guide
In short, linear is typically used for tone, balance and level control. Log or audio taper is almost exclusively for level and volume control.
The controls I’m selling are all stereo linear taper.
They may be used as volume control if you add a resistor between the wiper and ground to create a pseudo-log taper:
logpot
At a glance; it looks like the TKD will work for the left/right gain on the SP14. You’ll just be using one side of each control to make it work. Send me a message if you need a little more explanation.
Here’s a breakdown of potentiometer curve types:
Potentiometer taper - audio taper >> Resistor Guide
In short, linear is typically used for tone, balance and level control. Log or audio taper is almost exclusively for level and volume control.
The controls I’m selling are all stereo linear taper.
They may be used as volume control if you add a resistor between the wiper and ground to create a pseudo-log taper:
logpot
Last edited:
I despair of mine being delivered🙁
On Feb 11th it departed Los Angeles and arrived in London on the 12th according to USPS. Now four days later it is back in Los Angeles awaiting dispatch from there international distribution centre. Some one in London needs there knuckles rapping.
Thanks afxdave for your prompt dispatching of the pot.
On Feb 11th it departed Los Angeles and arrived in London on the 12th according to USPS. Now four days later it is back in Los Angeles awaiting dispatch from there international distribution centre. Some one in London needs there knuckles rapping.
Thanks afxdave for your prompt dispatching of the pot.
Glad the controls have arrived safely. I still have a few more available if anyone’s interested.
🙂
🙂
Last edited:
