Cheap printed circuit boards starting with 0,0375 Euro / cm2

[msdesigner]

Hello everybody,


I present you attached the cheapest manufacturing way, for single pcb layer ( home made ) with semi-professional look , starting with 0,0375 Euro / cm2.

Can be also tinned, the copper traces ....or even something like " soldermask " ( can be solder through "soldermask" applied )

You can see also some more projects of mine to bellow address:

https://www.dropbox.com/sh/gz4t8fdnt0ylfu3/Fia1FUt9Yu



If someone ( without technical possibilities and required time ) need to build a prototype board or very small quantity ( up to 10 pcs / pcb ) , please feel free to contact me to : msdesignerpro@gmail.com



I can deliver you all over the world , in cheapest way , through National postal mail services.


Kind Regards,


MSdesigner Pro
E-mail: msdesignerpro@gmail.com

 

[Bensen]

Hi,


Where are you from?
Do you need gerber files? I'm working with a light version (TARGET3001) and cannot convert to gerber.

Greetz

 

[msdesigner]

Regarding file format for PCB's

Hi,


Where are you from?
Do you need gerber files? I'm working with a light version (TARGET3001) and cannot convert to gerber.

Greetz

Hi Benson,

I am from Romania.
If you export as pdf .....jpeg ....etc and you mention the sizes at corners is OK ! ....We can talk more details if yo'll send me email with required file to : msdesignerpro@gmail.com

See you there ! 🙂

 

[msdesigner]

Hi Bensen,

I'm from Romania.
You can send me pdf , jpeg of file ....to : msdesignerpro@gmail.com
I suppose that you can export as jpeg otr pdf ...with at least 600 dpi ( resolution ) . Also menthion dimension at corners ( L x l )
Is not necessary Gerber file.

We can talk more by e-mail ! 🙂

I look there !

 

[msdesigner]

Some more printed circuit boards ( pcb's) , done it in last time can be seen it bellow:

 

[nlRenderman]

These look great! Can you also do black pcbs?

 

[msdesigner]

Thanks a lot for your appreciation.
I can't understand very well about " black pcb's".
What you mean ?

 

[Birger]

Thanks a lot for your appreciation.
I can't understand very well about " black pcb's".
What you mean ?

he means this material

160 x 100 mm 35µm Cu FR4 Platine schwarz kaufen - günstig bei OCTAMEX 160 x 100 mm 35µm Cu FR4 Platine schwarz bestellen - Datenblatt 160 x 100 mm 35µm Cu FR4 Platine schwarz

 

[msdesigner]

Thanks Birger.
Now is clear for me.
No I don't make it on black pcb.
Anyway , I have seen that this " black pcb " is for UV manufacturing procedure.
My procedure is an original one .....and is almost the same as " serigraphic procedure "
So is not as common way to manugature the pcb's , as UV ( photo ) or toner transfer.

 

[msdesigner]

FR4 ( fiberglass ) pcb with transparent soldermask.
Can be solder through it.

 

[msdesigner]

FR4 ( fiberglass ) pcb , for SMD components.

Any inquiry to : msdesignerpro@gmail.com

 

[AndrewT]

FR4 ( fiberglass ) pcb with transparent soldermask.
Can be solder through it.

What is the purpose of a solder mask that can be soldered through.

I thought a solder mask was there to prevent soldering beyond the intended pad area.

 

[FranciscoPerez]

They look great!
Building PCBs have always been a pain in the neck to me.

I'm droping you a line in case you can help me with a couple boards I need!!

 

[bkevin]

Could you make some of these? Universal PSU, Capacitor and Diode Combination Board (Pre-scored and easy to snap into sections) - PCBs There's several forum members who are after them but they're not available from the store and little indication of when they will be available again...

 

[msdesigner]

Yes ! Andrew , in fact you have right soldermask is to prevent......but in fact is not a "real soldermask " .......it's something like a glossy flux ( dried ) which prevent oxides of copper traces and in the same time you can solder through pads ( help soldering ) ..............and of course you must be careful to solder only on the pad's places.

All the best.

What is the purpose of a solder mask that can be soldered through.

I thought a solder mask was there to prevent soldering beyond the intended pad area.

 

[FranciscoPerez]

Ordered five Fr4 tinned boards from Mihai and received them today.
They look really professional and I'm very happy with the result!

He finished them during weekend a couple of days after payment and shipping was really fast too!

I just wanted to write a good review here so you may feel confident about ordering from him. Communication via email was great, and it was a pleasure to deal with him.

 

[AndrewT]

Do you have plated through holes?
How well do the traces survive removal of component lead and re-soldering?

 

[msdesigner]

I will not make through plate holes , because inquiry is under 1% !

The traces on FR4 ( better than CEM , XPC , if required many re-solderings) , are strong enough.

Re-soldering is helped if traces are tined from beginning.

Re-soldering " traces- pad's life" it depends of soldering skills ( soldering time , de-soldering time) , soldering temperature , de-soldering temperature.

If you want, we can talk more to : msdesignerpro@gmail.com

I can answer you much faster through above e-mail.

All the best,

Mihai

Do you have plated through holes?
How well do the traces survive removal of component lead and re-soldering?

 

[msdesigner]

Hello everybody !

Bellow you can see the latest pcb's done it on FR4 and CEM support.
Two of them, are tin plated.

If anyone without technical possibilities is interested, I can help him in fastest way , and cheapest way , including delivery all over the world with National Post Mail Services.

All the best,

Mihai

 

[msdesigner]

Hello everybody !

Bellow you can see my latest pcb's done it on FR4 and CEM support.
Two of them, are tin plated.

If anyone without technical possibilities is interested, I can help him in fastest way , and cheapest way , including delivery all over the world with National Post Mail Services.

All the best,

Mihai